With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Since KillerK would not post his MAGNUM I decided to take matters into my own hands. Plus, all these kids who don't have enough skill to build it ...
1.)Build these. 2.)Add these. 3.)Connect them. 4.)Begin assembling the barrel. (If you are confused about which sections you connect, refer to picture 5.) 5.)The product of step four. ...
1.) Build these. 2.)Done.
1.)Build this. 2.)Build this. 3 & 4.)Inset 1 into 2. 5.)Product of 3 & 4. 6.)What you should have so far. 7.)Add these. 8.)Add the rest of the ...
1.)Take a normal green connector piece and cut this part off with a hammer and a screwdriver like this. 2.)Finished Product. 3.)Connect it like this. 4.)Done.
1.)Put these on these things. 2.)Connect them to the end of the upperportion of the barrel like this. 3.)What you should have so far. 4.)Add the bottom portion ...
1.)Connect these two things like this. 2.)add it to the front like this. 3.)Add these to the front. 4.)Done
1.)This is what you are inserting. 2.)Create a bow in the middle of the barrel like so. 3.)This is the easiest way to insert it. 4.)This is how ...
1.)You slide this piece into here. 2 & 3.)This is what it should look like if you did it porperly. 4.)Done
1.)Take this piece... 2.)And connect it here... 3.)Like this. 4.)Connect the Handle. 5.)Add these little guys here. 6.)Done.
1.)Put one like this. 2.)Put the other like this. 3.)Done.
1 & 2.)These keep the "safe" out of the way. 3.)This really isn't a mod, but these are my some possibilities of KillerK's "MAGNUM Round." If you try ...
Magnum modificationby knex forger
KILLERK Magnum Add-onsby danfog
redone killerk magnumby conor1148
Knetix magnum (killerk's perfected)by Kinetic
knex gun magnum sniper xxxby gibbo_gunner2496
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.