Step 4: More gluing
I used Aleene's tacky glue to glue down the felt. It is similar in appearance to normal white PVA glue, but much thicker. I put a fair amount down on the front inside cover, then used a razor blade to spread it around like I did with the foam.
Place the felt down and carefully push from the center to the edges to get it to lay flat without any puckers.
I used another book and the free weights again to clamp and let it sit overnight.
Place the felt down and carefully push from the center to the edges to get it to lay flat without any puckers.
I used another book and the free weights again to clamp and let it sit overnight.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
