Say hi to Kirby!
An amazing Robot who measures your levels of stress and anxiety. Kirby helps you to overcome these problems by streaming relaxation music, and offering tips to manage anxiety and stress.
BONUS: Kirby face changes according to your mood!
Step 1: Step 1
Download the Kirby PDF FILE, and Print it out.
Step 2: Step 2
Once that you have printed the robot and instructions, sit down comfortably with the rest of your materials (scissors and glue) and get ready to start.
Step 3: Step 3
Cut across the 5 different shapes across the page to separate the parts of the robot (body, head, arms, and feet). Don't not cut through the dotted lines.
Step 4: Step 4
Once the you already have cut all the pieces, proceed to fold those grey folding areas.
Step 5: Step 5
Note. It is preferred to start assembling the body because it is the main part, so it needs longer time to glue together.
Apply tape/glue onto the grey area and connect it with the other end of your shape. Keep the area pressed with your thumbs for a few seconds until it safes to leave it.
Step 6: Step 6
Now, that you have all the pieces assembled, it is time to put them together. Apply glue/tape at the bottom of the head and put it over the body.
Step 7: Step 7
The single feet or wheel should be tape or glue onto the white area with the yellow sides towards the outside matching with the rest of the robot. And it should be placed at the bottom of the robot for support.
Step 8: Step 8
Finally, glue/ tape the arms on each side of the body.