Print PDF
Favorite
Email
Step 3Cut the wood
Use the measurements from that final colorized image in the last step (I also added it to this one for reference), and cut the wood.
You need two of A, B, C, and F, and only one E.
A, B, and C should be cut out of the thin, 1/8" plywood. F should be cut out of the nice birch plywood. E should be cut out of the ugly scrap plywood, because you don't see it in the finished product.
In the image of the cut wood, E is at the top, the A/B/C pairs are next down, and both F are at the bottom.
You need two of A, B, C, and F, and only one E.
A, B, and C should be cut out of the thin, 1/8" plywood. F should be cut out of the nice birch plywood. E should be cut out of the ugly scrap plywood, because you don't see it in the finished product.
In the image of the cut wood, E is at the top, the A/B/C pairs are next down, and both F are at the bottom.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
