Instructables
Hey guys, this is my new K'nex Advanced Combat Optical Gunsight (ACOG). It is based on the ACOG from Barrax's Intervention, but is a lot simpler and can fit to most guns (with a bit of modding). So sit back and get  your pieces ready, cos this is a good 'un!     

Parts list:
Rods:
Green rod - 9
Blue rod - 7
Connectors:
Dark Grey connector - 4
Orange connector  - 10
Yellow connector - 8
Misc.:
Modded yellow - 2
Odd orange half snowflake - 1

Now, to put things straight, if you say ACOG Scope (Like IW does) then you're saying Advanced Combat Optical Gunsight SCOPE, which makes no sense whatsoever. 
 
Remove these adsRemove these ads by Signing Up

Step 1: Body

This step shows you how to make the scope.
1) Make these pieces
2) These pieces make up the top of the scope. Make them as well.
 3) Make this piece. The odd orange connector is used to create the reticule
 4/5/6) Add the pieces to the body panels as shown

Step 2: Connection

Picture of Connection
Photo0053.jpg
Photo0054.jpg
1) Modify these yellow connectors as shown
2) add them to the scope
3) add them to your gun!
You've just finished making a K'nex ACOG. Now go use it responsibly.
@H1T4TCH1 holy crap your dog looks like mine1
H1T4TCH13 years ago
Hey man, just finished mine and put it on my Knexsayer. Awesome work.

Couldn't get pictures on because phone cable is kinda broken...

Seeya.
JROBE4 years ago
nice i just made it
knexpete (author)  JROBE4 years ago
nice. any pics?
knexfan91824 years ago
Too small.
knexpete (author)  knexfan91824 years ago
well, anyway a lot of the time small optics work better. It's compact, easy to use and is very effective
knexpete (author)  knexfan91824 years ago
how do you know it isn't a small make of ACOG. Try looking at PMG, then see the range of ACOGs you can get
MegaMetal84 years ago
ALOT like my red dot scope (and mine doesnt use modified pieces) heres some pics
100_1078.JPG100_1080.JPG
knexpete (author)  MegaMetal84 years ago
yeah, well a lot of people use the gold track connector as a sight as it's small and grants great peripheral vision But good scope!
yeh but they provide the same sight but mine doesnt have any modified pieces cause trust me, people arent gonna cut pieces for a sight
knexpete (author)  MegaMetal84 years ago
In truth, I only used the modded pieces because I had them available. I originally cut them for my SCAR, and when i took that apart to make Barrax's ACR i needed to use them.
But you could replace them with hinges, and then connect a light grey connector to the rear of the sight. Works the same
ok sorry bro i didnt know
~KGB~4 years ago
nice!
rec0n4 years ago
AWESOME! 5*
knexpete (author) 4 years ago
Very sorry about this, but the image uploader seems to be going through a mad phase right now. I hope to have the images for the Intro and Step 1 uploaded by tomorrow (27th July) but if i'm unable i may delete this instructable and start a new one<br> once again sorry for any inconveniences