Introduction: K'nex ACOG Mk.II

About: Get off your computer and out into the real world. Bit hypocritical since i spend a lot of time on wikia........but anyway. I'm Knexpete, also known as Heatedpete or Heat. I spend a lot of time tweaking my cur…

Hey guys, this is my new K'nex Advanced Combat Optical Gunsight (ACOG). It is based on the ACOG from Barrax's Intervention, but is a lot simpler and can fit to most guns (with a bit of modding). So sit back and get  your pieces ready, cos this is a good 'un!     

Parts list:
Rods:
Green rod - 9
Blue rod - 7
Connectors:
Dark Grey connector - 4
Orange connector  - 10
Yellow connector - 8
Misc.:
Modded yellow - 2
Odd orange half snowflake - 1

Now, to put things straight, if you say ACOG Scope (Like IW does) then you're saying Advanced Combat Optical Gunsight SCOPE, which makes no sense whatsoever. 

Step 1: Body

This step shows you how to make the scope.
1) Make these pieces
2) These pieces make up the top of the scope. Make them as well.
 3) Make this piece. The odd orange connector is used to create the reticule
 4/5/6) Add the pieces to the body panels as shown

Step 2: Connection

1) Modify these yellow connectors as shown
2) add them to the scope
3) add them to your gun!
You've just finished making a K'nex ACOG. Now go use it responsibly.