K'nex Arcade Coin Pusher instructable

 by K'nex_Freak
Featured
IMG_0045[1].JPG
IMG_0050[1].JPG

I have had some requests to create an ible for this coin pusher. I am using a drill as a motor to turn the axle because I don't have a k'nex motor. I am sure that you can easily modify it so you can use a normal K'nex motor. Please rate well and subscribe.

 
Remove these adsRemove these ads by Signing Up

Step 1: The Base

IMG_0051[1].JPG
IMG_0052[1].JPG
It is simple to make the base just with images.
halo99 says: Jun 18, 2011. 9:03 PM
wow, It took me 2 hours to perfectly re-create and modify the coin pusher from just the slide show...Exactly after I finished it you made an instructable on it, whats your problem
TheFoofinator in reply to halo99Jun 19, 2011. 5:36 AM
Maybe it took him 2 hours to make the ible?
knexpert#10829476 says: Sep 19, 2012. 4:08 PM
This is really cool! 5 starred this one!
GASSYPOOTS says: Mar 26, 2012. 3:33 PM
make an outer case for it :3
Kacper18 says: Jul 8, 2011. 7:49 AM
Can you make the whole thing bigger and not cut the red rods?
K'nex_Freak (author) in reply to Kacper18Jul 9, 2011. 2:27 AM
yeah. definitly. i don't have enough pieces though.
Knex1235 in reply to K'nex_FreakJul 11, 2011. 11:52 AM
can you do it with a real motor
legodude42901 in reply to Knex1235Feb 26, 2012. 10:37 AM
yes just build the base of motor
K'nex_Freak (author) in reply to Knex1235Jul 15, 2011. 5:47 AM
if you can figure out how to put it on.
Athebest says: Dec 23, 2011. 3:45 PM
This is sweet! I have even made a couple cents off of my brother and sister.
TomCat1 says: Aug 11, 2011. 6:32 AM
I am going to try and make this. I am also going to try and make it bigger. I might post the bigger version when I have made it
MajorTemples says: Aug 3, 2011. 6:58 AM
Good job! I made one myself too after seeing yours.
http://www.instructables.com/id/Knex-Coin-Pusher-1/
jelmer2209 says: Jul 31, 2011. 5:56 AM
I think I'm going to make one too and post the picture when I'm done =]
MegaMetal8 says: Jul 7, 2011. 11:52 AM
Might actually build this.
awesomist1234 says: Jun 23, 2011. 2:56 PM
wait, do u have to cut the red rods?
flimsy_man in reply to awesomist1234Jun 24, 2011. 12:24 PM
Araid u do. It will jam otherwise. sorry.
knex builder36472418 says: Jun 20, 2011. 8:02 PM
rubbish design! looks good though, but you have to cut pieces :( (which i didnt do)
~KGB~ says: Jun 18, 2011. 9:09 AM
nice one!
K'nex_Freak (author) in reply to ~KGB~Jun 18, 2011. 9:20 AM
TY. I like your k'nex pocket pistol.
~KGB~ in reply to K'nex_FreakJun 18, 2011. 12:33 PM
np, thanks! please rate my ball machine 5* to help me win the toy challenge!
apples!!!!! says: Jun 18, 2011. 11:14 AM
That's actually really awesome! I think you should invest in making it larger and adding the tilting port to where you add the coins, if you can.
K'nex_Freak (author) in reply to apples!!!!!Jun 18, 2011. 11:29 AM
I would do this but that is all of my k'nex used up. I am looking into buying a load more off ebay.
apples!!!!! in reply to K'nex_FreakJun 18, 2011. 12:32 PM
Understandable. Anyways, I hope to see more like this in the future!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!