loading
Picture of Knex Assault Sniper Rifle  K.A.S.R
This took  3 hours for experiments it works and its great.
 
Remove these adsRemove these ads by Signing Up

Step 1: What you need

Picture of What you need
what you need

Step 2: Scope

Picture of Scope
make this its very easy theres a white behind the tire

Step 3: Make the handle

Picture of Make the handle
not so easy make the picture but theres 3 Green connectors in between the handle on both

Step 4: The Body

Picture of the Body
DSC_0043.JPG
no the body there is 21 yellow connectors 4 orange connectors 1 white and 1 red

Step 5: The stock

Picture of the stock
DSC_0048.JPG
theres 12 yellows 6 green connectors 4 blue full moon connectors 2 tan and 2 gray for the stock
cool gun 5 star all the way ps can you check out my gun and tell me what you think its a assault rifle bolt action 25-30 round mag and a front grip with an attachable grenade launcher heres a link http://www.instructables.com/id/knex-assault-rifle-48/
loonley4 years ago
nice snper though
~KGB~5 years ago
meh...
What DJ said but with an added 0.5
It's hardly a nice comment, you made a POS and somehow it has a rating of over 2
Because not enough people rated it.  We need at least 6 negative ratings to get it under 2.
TheChemiker5 years ago

Wow this is so amazing it should go into the knex hall of utter failure.

Vynash5 years ago
I'm sorry, but 3 hours? maybe 5 mins lol sorry but...
 No, no no and no!

A) Block trigger!
B) Flimsy (We can tell!)
C)Bad scope
D) Tube and stick gun - one was enough! (KillerK's...)

0.5*
Max i'll give for a block trigger!
JonathanTD (author)  RMConstruction5 years ago
okay look if it doesn't meet your expectations dont make it dont even comment if it isn't nice i mean this is my first one. 
DJ Radio5 years ago
3 hours to make this POS?!  Seriously?
JonathanTD (author)  DJ Radio5 years ago
No the other time I made it to  long and the bolt would strike then bullet because the barrel would bend and the is my first gun srry.