With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ...
Here's all of the pieces you'll need to build the card shuffler. Rods: 261 green-149 white-79 blue-16 yellow-6 red-11 gray-...
This is the first part of the shuffler, this is the part where you insert the cards. Follow all of the notes on the pictures.
This is the second part of the shuffler. Follow all of the notes on the pictures.
This is the third part of the shuffler. Follow all of the notes on the pictures.
This is the fourth part of the shuffler. A bit of a short step... Follow all of the notes on the pictures.
This is a top section that will go onto the back of the shuffler.
In this step, you'll make the things that the cards will slide on when they are emptied into the tray. Then you'll make the card pusher.
This top section will complete the look of the top. Also, you'll build the battery pack holder.
Here is the part that will make it all automated: the motor! I'm sorry about this step, but it is all in one clump. It was too fiddly to take apart, ...
Here you'll attach the motor to the shuffler and connect the battery pack.
Now you'll build a bottom section and fix up the rubber bands.
This is the tray that will hold the shuffled cards.
This is the other shuffler, just repeat steps 2-8, but do not add the battery pack holder as the other one. Follow the notes on the pictures! :-) Th...
Attach the other shuffler to your model. Make sure the rubber bands are fixed up right.
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »