Introduction: Knex Ball Machine Elelement: BuzzSaw

Picture of Knex Ball Machine Elelement: BuzzSaw

Hey everyone,

Here are instructions for one of my biggest elements so far. I never had a problem with it in my Ball Machine Eclipse, it works really smooth and works 99% of the time. If you want to use this element make sure your Ball Machine is solidly built and can support a lot of weight. Just to let you know, there is a possibility that your machine shakes a little bit when the arm comes back up. It depends on how big and solid your machine is. you can always watch the video to see it in action.

If there are any problems/ questions feel free to ask me in the comment below.

Thanks for watching/ building,

Thibault Art.

Step 1:

Picture of

Step 2:

Picture of

Step 3:

Picture of

Step 4:

Picture of

Step 5:

Picture of

Step 6: The Chain

Picture of The Chain

Step 7:

Picture of

Step 8:

Picture of

Step 9: The Axle

Picture of The Axle

There are 2 blue spacers on each side of the axle.

Step 10:

Picture of

Step 11: Little Detail

Picture of Little Detail

If the ball doesn't land on the exit path, then you just need to attach a green connector with a green rod on the exit path.

Step 12:

Picture of


About This Instructable




Bio: Hey everyone. I'm Thibault Art and my biggest hobby is to build huge machines in K'nex. I like also to draw a lot ... More »
More by Thibault Art:Knex Ball Machine Separator (3 Outputs)Knex Robotic Bottle FlipperThibault Art Knex Ball Machine Lifts
Add instructable to: