With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Introducing my ball machine Lithium. It has 2 lifts including Keggore1's car lift and ChassisDude98's Quarter Arm Lift. I have modified ...
If you don't know what part I'm talking about refer to the pictures. p.s. On pieces exceeding the hundreds I can't guaranty an exact piece count. Connectors grey ...
The track is what the cars will run on. The bottom turns are the ones that don't have the grey rod, the top ones do.
The support towers will... uh... support the track. First you will build the left one. Then the right. And finally the middle.
This lift was originally built by CassisDude98. I just modified it a little.
My ball loader is a bit different then Keggore1's.
Both the left and right side contain 3 levels.
The right side is almost the same as the left.
Just a couple extra supports.
The green tunnel part is not a necessity. It just makes it look cool.
You can use thick or thin roller coaster track. You may have to trim it a little shorter once you put it on.
You can build as many cars as you want. If your using the older boxier motors make sure you take off the battery covers and put some tape ...
Congratulations! Now that your all done throw some balls in it and have fun watching the cars pick them up and take them up the hill. Remember to ...
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.