Introduction: K'nex Box
Hello people, I have made a small knex box. It doesn't have too much holes in, and I can't say it can fit really big things in but it's like one of them accessory boxes. And I'm not saying that it's for things like ear-rings or other small stuff but you get what I mean. Anyway, let's get on with the building! Please check out my smaller version: https://www.instructables.com/id/Knex-Mini-Box/
Please rate, comment, subscribe and enjoy!
Step 1: What You Will Need
You will need all this knex:
48 green rods
37 white rods
3 yellow rods
11 red rods
2 dark gray connectors
11 orange connectors
2 red connectors
40 purple connectors
4 yellow connectors
12 white connectors
Total: 164 peices
Step 2: The Sides of the Box
Here you will make the sides of the box. Simply follow the picture.
Step 3: Make the Other Sides
These are the other sides of the box. Once again, just make the things on the pictures.
Step 4: Make the Bottom and the Lid
Here you will make the lid and the bottom of the box.
Step 5: Add the Sides On
Add the sides on like shown on the pictures. Please follow the image notes!
Step 6: Add the Lid and the Bottom
Here you will finish the box. Follow the image notes again.
Step 7: The Finished Model!
That's it then! You've finished your box!
Please rate comment, subscribe and enjoy!
We have a be nice policy.
Please be positive and constructive.