Instructables
Picture of Knex Browning M1919 Chain-fed MG
knex browning bipod.jpg
knex browning.jpg
knex browning sights.jpg
knex browning 2.jpg
browning-real.JPG
THIS.... is the first k'nex browning posted on this site. it isn't to big which can be good and bad. Good for people with not much k'nex. or Bad because it doesn't look the right size to seem cool. It is a chain fed MG which fires at about 2-4 bullets a second.

erm....

Pro's
Looks
Sights
Firing rate
Can fire continuously for ages depending on length of chain.

No's
Long Reload time
Range (10-20ft)
USES MODDED PIECES!!!!! AAAARRGGHH!!!

Ahem. Excuse me. I'm surprised you've read this far.
Anyway, Let's start building!

Step 1: Chain

Picture of Chain
chain 2.jpg
Ok. Let's get the boring part over and done with. THE CHAIN!!!

1.Individual bullet (note the 2 chain links)
2.All connected

Step 2: Handle

Picture of Handle
handle 2.jpg
handle 3.jpg
handle 4.jpg
handle 5.jpg
handle 6.jpg
handle 7.jpg
handle 8.jpg
handle 9.jpg
Now to start on the gun. First of: The Handle

1.Make 2.
2.Add Blue and Yellow Rods to one of them.
3.Make 2.
4.Connect one of them to the thing that you added the Blue and Yellow Rods to. (Picture 2)
5.Add either Y Connectors, Blue Spacers, End Clips OR Grey Connectors on the Blue Rods. Then wrap the wire from the Motor round the Rods.
6-7.Add the other 2 sides back on.
8.Add Blue Rods and Blue Spacers to the controller.
9. Attach it to the rest of the Handle

Step 3: Body

Picture of Body
body 2.jpg
body.jpg
body 2.jpg
body 3.jpg
body 4.jpg
body.jpg
body.jpg
body.jpg
body.jpg
body.jpg
body.jpg
body.jpg
body.jpg
Now for the Body and all the components that make it work.

1.Make 2.
2.Add Green Rods onto the Sticky Outty Things...
3.Make these. They are 5 layers wide.
4.Add.
5.Make this.
6.Replace the Orange Connectors with something else if you don't want the Bipod.
7-8.Insert it in and attach the Handle.
9.Attach the other side on now.
10.Get 2 Blue Rods and put them where circled. This will stop the 5 layered things from flopping about.
11.Make This. The Rear Sight. Sorry about the blur.
12.Attach.
13.Make this. You don't have to mod the Yellow Rod.
14.Attach.

Step 4: Barrel

Picture of Barrel
barrel 1.jpg
barrel.jpg
barrel.jpg
barrel.jpg
barrel 1.jpg
barrel.jpg
barrel.jpg
barrel.jpg
barrel 1.jpg
The confusing part. MODDED PIECES NEEDED!! :(

1.The modded pieces. 4 Grey Rods and 2 Yellow Rods.
2-3.Make this. Use the 2 modded yellows.
4.Make 2 of these. yes they are confusing. I'm sorry i couldn't show you the pattern. I would never be able to put it back again. Either use Snowflakes or try to figure it out for yourself.
5-6.Connect.
7.Connect.
8.Attach to gun.
9-10.Now the barrel will be a bit flimsy. So i suggest using a rubber band to pull it up.
 
Remove these adsRemove these ads by Signing Up
1-40 of 69Next »
PiTBuLL8925 years ago
noooo
i havent got that motor is there a way to use a different one???
yay!!
found one near enough the same (you have to flick a switch instead of press a button)
Did that too.
cerj (author)  PiTBuLL8925 years ago
yeah anyone will work but my one has the wire so i don't have to reach in to turn it on
PiTBuLL892 cerj5 years ago
mine has a wire too but a switch instead of a button
knexboy9593 years ago
How do you make that chain.
how does the chain connect plz reply asap!
stryker33 years ago
Is the barrel functional?
stryker33 years ago
How does the chain work? how does it fire? NEED HELP!!!
stryker33 years ago
This is so confusing! you should add more views of the chain!
cool
very confusing!!! post a picture on the front view!!>:(
10-20 ft....ouch.
hey nice gun how doo yoo get it to fire and how to fit the chain in?
the poodleo3 years ago
please please please try to make a version where there is NO MODDED PARTS! PLZPLZPLZPLZPLZPLZ!
thatguy954 years ago
hey, mate this browning is awesome :D good work it looks grate, ive always had a thing for ww2 weaponry. Ive just got one problem, u know the smaller pictures at the bottom of the big one? well how do u select those to make them bigger? if you could reply asap that would be cool, cheers!
i have as mg42 i recenly posted if you like ww2 guns
cerj (author)  thatguy954 years ago
there isn't a way to make them bigger via enlarge button or anything i don't think. but holding CTRL and scrolling changes the size of the page.
(YOUR N cerj4 years ago
This gun looks like trash compared to mine
Works well though
im lucky and use a wii.
slow on typing, but zoom is an easy option!
thatguy95 cerj4 years ago
ahh thanks, i found out if you click them and type in your username and password it does make them bigger then u can scroll through them, thanks for that anyways :)
mpk44 years ago
I only have the ferriswheel motor
bighead54544 years ago
is there any way to make a high-powered MG with an actual magazine and not a chain or a gatling-style barrel thingy
Seleziona4 years ago
looks very good! BUT I DONT HAVE CHAINS!
cerj (author)  Seleziona4 years ago
 No THAT sucks!
Seleziona cerj4 years ago
i know eh?
cerj (author)  Seleziona4 years ago
 Ever heard of the Vector from Modern Warfare 2?
(Real Name KRISS Super V)
Should I Post?
Untitled.jpgvector.jpg
cerj (author)  joshualater4 years ago
when i say "should i post?" i dont mean "im posting this soon so get ready" lol its a general questing im asking.
post
cerj (author)  thomaswatton4 years ago
 Demolished AGES ago.
Kiteman's law, YOU HAZ BROKENZ IT!
cerj (author)  joshualater4 years ago
sorry but, WHO DA F00K IZZ KITEMANZ?!
OMFG only daz mostest legendary ibble-ite of all frakking time http://www.instructables.com/community/The-answer-is-almost-always-YES---AKA-Kitemans/
o lol
 The deatomizer from the Conduit looks just like the KRISS... but it shoots LASERS.
cerj (author)  Bright Shadow4 years ago
 lol
 Oh wait, that should've been:

<fingerquotes>LASERS</fingerquotes>
Seleziona cerj4 years ago
holy krapolee! you gotta post! is it single shot? but post anyway!
cerj (author)  Seleziona4 years ago
 0_0

I'll post a slideshow first to see what other people think. And it uses the mech off of DutchJ's Assault Rifle
1-40 of 69Next »