this is my first instructable so i hope u like it. it doesn't require enourmous amounts of k'nex
Step 1: K'nex Bits
This is what you need:
14x green bits
not quite sure how many small green bits so get a large handful and use picture for reference
3x blue bits (ignore picture)
4x blue rings
2x smallish white bits
2x white/black bits that go all the way around
6x grey 'clips'
sorry for stupid names. please tell me if you have any better ideas
Step 2: Making the Body
Take three green bits (as seen in picture) and use appropriate small green bits to connect them. Then, add another small green bit and a green bit to make it 1 bit longer (as seen in picture). Only do this to two of the body components though.
Step 3: Finishing the Body
Put all of the body side by side and make sure the smaller bits are in the middle. Secure them by sticking three blue bits in. DO NOT ADD GREY CLIPS YET.
Step 4: Making the Wheels
You can ignore this step if you want.
Take the wheels and add green bits all the way around. It doesn't really do anything but it kinda looks cool to me.
Step 5: Putting on the Back Wheels
With the wheels you have just made, put them on the opposite end to the two bits sticking out. Now you can secure them with grey clips.
Step 6: Finishing the Wheels
Use four blue rings, two blue rings on either side, and put them on the middle bit. Secure them with grey clips. Then use the other wheels for the front, and, you guessed it, secure with grey clips
Finally stick two white bits on the front and, Hey Presto, you're done