Print PDF
Favorite
Email
Step 5Assembley
Here you get to put the board together. Pretty easy. Go nuts!
1: Connect the two side pieces to one of the end bits
2: Should look like so
3: Add the other end bit on the other side. Now you have a box
4: Put the bottom piece in like so
5: Close up of that connection
6: Now, slap the board on top. Make sure that all the blues are pointing their slots either always at a 45 degree angle up or down. They cannot be side up, then down. then up, etc. Just make sure to put it on as it is in the photo.
7: Close up of one of the corners
1: Connect the two side pieces to one of the end bits
2: Should look like so
3: Add the other end bit on the other side. Now you have a box
4: Put the bottom piece in like so
5: Close up of that connection
6: Now, slap the board on top. Make sure that all the blues are pointing their slots either always at a 45 degree angle up or down. They cannot be side up, then down. then up, etc. Just make sure to put it on as it is in the photo.
7: Close up of one of the corners
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
