Pieces you will need:
13 Yellow connectors,
3 Red connectors,
3 Grey connectors,
3 Green connectors,
2 White connectors,
24 White rods,
20 Green rods,
2 Grey rods.

Step 1: Step 1

Get 5 Yellow connectors and 4 Green rods and put them together in a zig-zag formation.

Step 2: Step 2

Get 5 White rods and place them into the 5 Yellow rods.

Step 3: Step 3

Get 4 White rods and fill in the gaps between the yellow connectors.

Step 4: Step 4

Get a Green rod a White rod and a Red connector and clip them together. And attach to the handle.

Step 5: Step 5

Clip on two grey rods as the blade.

Step 6: Step 6

Get 4 Yellow connectors and 1 Red connector and clip onto the White rods.

Step 7: Step 7

Get 4 Green rods and 5 White rods and fill in the gaps and repeat symmetrically on the flip side.

Step 8: Step 8

Now for the handle get 1 White connector and put onto the only remaining white. Then connect the White connector and Yellow connector with a Green rod.

Step 9: Step 9

Now take 1 Grey connector, 1 Green connector, 1 White rod and 2 Green rods and put them together. Add them to the handle and repeat symmetrically on the flip side.

Step 10: Step 10

Get your last 3 pieces; the Green connector the Grey connector and the Green rod and add to the top of the blade.

Step 11: Finally

Have fun with your Knex Knife enjoy, show all of your friends, play awesome games and much more but please play responsibly as even though it isn't a real knife you can still hurt your self. Thanks and bye :)
Thanks this knife is perfect for my trex slayer adventure
Complete and utter rip off of the Knex B2 combat knife. Please give credit where it is due.
Check out my you tube videos at https://m.youtube.com/channel/UCHFNawYQxJXk0UtYrIrIGqQ
<p>Such a cool Knex project! Thanks for sharing! </p>
If there are any more projects you'd like me to try I'd be happy to give them a go :)

About This Instructable




More by KaneTheKnexKid:Knex Combat Knife 
Add instructable to: