Introduction: Knex Crossbow...H.P.B...(High Powered Bow)

Picture of Knex Crossbow...H.P.B...(High Powered Bow)

I have made this new bow and I have to say, I am pretty surprised with the results...

PROS
Very sturdy
Very powerful
Easy to mod
Foldable hand grip and steadifier to aim better.
Not much pressure put on parts unlike other bows.

CONS
Sometimes band can slip from under grip but use more bands to resolve this.

It can shoot and stick into cardboard and goes straight through paper.
For added power it uses what I like too call...KILLER AMMO... Which is a red connector with a small y bracket connected...It spins in the air providing more power and more range, this is how it sticks into the card...Its sort of like throwing a knife. When you throw is it spins but in this case you shoot it and it spins.

Step 1: The Front

Picture of The Front

Just make from the pictures. If you need help comment.

Step 2: The Main Body

Picture of The Main Body

Just make from the pictures. If you need help comment.

Step 3: The Hand Guard and Trigger Mech

Picture of The Hand Guard and Trigger Mech

Just make from the pictures. If you need help comment.

Step 4: Assembly

Picture of Assembly

Just make from the pictures. If you need help comment.

Step 5: The Finishing Touches

The ammo that this crossbow uses is a red connector with a y connector attached.

Place bands through the three holesat top of stopper to keep it down.

USE A LARGE BAND AS THE POWER BEHIND THIS..... HOOK AROUND THE TWO ENDS OF THE CROSS SECTION.
 

I CALL IT KILLER AMMO.

PLACE THE BANDS ON.

PLEASE LEAVE YOUR COMMENTS BELOW!!! 

I WILL BE UPLOADING PHOTOS OF WERE THE BANDS GO SOON... IF YOU DO NEED HELP JUST COMMENT.

Comments

sharpbike123 (author)2012-06-17

Hope YOU GUYS LIKE IT !!!!

About This Instructable

475views

1favorite

License:

More by sharpbike123:Knex Crossbow...H.P.B...(High powered bow)knex tank
Add instructable to: