Introduction: K'nex Double-Barrel Hybrid Gun

Hey guys! This is my new gun, a double-barreled, bull-pup/regular magazine gun. This idea was given to me by JonnyBGood, and I think he is going to like it. Basically, there is one barrel that runs off of a magazine that is in the front. The other barrel runs off a bull-pup magazine. However, they both run off of the same trigger. To keep the gun compact/smaller, I had to put the second magazine on top of the gun, giving it a somewhat weird, yet intriguing look. Just like my bull-pup gun, it fires two bullets, which are a gray one-slot connector with a cut green rod, (yes the cut green rod is necessary). So basically, this is my bull-pup gun with a magazine added to make it more fun to mess around with. Also, both magazines hold 8-10ish rounds at most. So, here are some Pro's and Con's.

.

-Pro's-

Decent Range 25 feet.

In my opinion, looks kind of cool. Once again, it looks futuristic.

Two magazines

Two shots at once

Good Trigger

Comfortable

Compact and lightweight

Sturdy

-Con's-

Neither of the magazines are pre-loadable OR removable.

Can't use the stock when it is pulled back. This is simple to fix, by adding one unit/row to the back of the stock.

One bullet will usually go farther than the other.

.

Thanks for taking a look! To find more of guns like these, visit my channel, or subscribe! Please leave your thoughts in the comment section below. Also, I am needing/looking for new ideas and concepts to build. If you have any suggestions, please post them on my Orangeboard, or comment below. I don't care if it's an idea that seems ridiculous, I'll at least try it out. I just like a good old challenge.

.

I might be posting a video of this gun shooting, but don't count on it.

Comments

author
JonnyBGood (author)2014-10-29

Well, if one thing is for sure we definitely don't have the same angle on how I would go about this, but that's what makes any idea unique how you interpret it. I'm not a huge fan of the top magazine but I also realize the mechanism has to go somewhere (preferably on the inside). I also like the rounded appearance of the gun in general. Overall great job!

author
knexguy237 (author)JonnyBGood2014-10-29

Yeah, I don't like the top magazine either, but the way this was built, I didn't have enough room to put another mag on bottom, or even in front of the trigger. The ram wouldn't reach that far, and I couldn't figure another way. Thanks for your feedback though!

author
JonnyBGood (author)knexguy2372014-11-02

I understand, part of the challenge of the concept. I don't normally aim at something easy. =P

author
knexguy237 (author)JonnyBGood2014-11-02

Yep. Thanks for the challenge though!

author
sandroknexmaster (author)2014-10-26

Looks good!

author

Thanks!

author
Lucas The Boss (author)2014-10-26

Cool!

author

Thanks!

About This Instructable

123views

1favorite

License:

Bio: I do K'nex...a lot. It's fun to mess around with new mechanisms, and to learn about basic engineering. I build mostly guns ... More »
More by knexguy237:K'nex Spring Powered PistolK'nex Slide Action IB Rifle - I'm Back?!NG V3 K'nex Gun
Add instructable to: