Introduction: Knex Ferris Wheel

Picture of Knex Ferris Wheel

Step 1: The Base

Picture of The Base

The base - where it all starts

Step 2: Support Columns

Picture of Support Columns

The support columns note that I used blue rods and orange connectors to conserve pieces, but you can use red rods if you have them. Make one of each

Step 3: The Arch

Picture of The Arch

The arch along with the axle and the motor 2 blue spacers after the three gray ones on the motor

Step 4: The Wheel - Part 1

Picture of The Wheel - Part 1

Make 8 of these things

Step 5: Making Seats

Picture of Making Seats

Photo 1 make 3 times Photo 2 make once

Step 6: Assembly

Picture of Assembly

Putting all together

Step 7: The Chain

Picture of The Chain

The last step. Grab 25 chain links


sandroknexmaster (author)2013-02-16


TheAwesomestDude (author)2013-02-15

looks preety nice

About This Instructable




More by teamgenez:Knex Chain Elevator Knex Plane (100% Realistic)Knex Ferris Wheel
Add instructable to: