Introduction: Knex G36c

Picture of Knex G36c

This is my first knex gun and instructable. Be critical i want to know how i can improve my gun. 

Range: 30-40 feet depending on the rubber bands
Looks good
Ramming rod is hidden until cocked
Differnt sized handgrips
Strong stock
Sood magpusher

Skeletal in front
Fat handle
Ramming rod is hard to cock
Ramming rod sometimes misses the barrel

Credits to The Dunkis For his bannana mag.

Step 1: Stock

Picture of Stock

What you will make






Step 2: Body and Trigger

Picture of Body and Trigger

What you will make

Make 2

Attatch blue rods with 2 grey spacers and 1 blue spacer

Attatch other side of gun

Add 2 orange connectors on each side


Attatch blue rod with 2 blue spacers

Remove yellow connector on back of gun

add trigger

add yellow connector that was removed

add ruberband around the middle white rod only as shown

me holding the trigger back

make sure trigger is in front of blue rod and spacers as shown

Step 3: Handle

Picture of Handle

what you will make

make 2

Add blue rods with 2 grey spacers and 1 blue spacer

add other side of handle

another view of the handle

Step 4: The Dunkis Mag

Picture of The Dunkis Mag

What you will make




put together

another view

Step 5: Mag Pusher and Ramming Rod

Picture of Mag Pusher and Ramming Rod



on ramming rod cut the end with wire cutters

Step 6: Hand Holds

Picture of Hand Holds

Choose wichever size u like large medium or small

make big one (17 yellow connectors) first 2 pictures

Make medium one (12 yellow connectors)second 2 pictures

Make small one (yellow rods with 8 yellow connectors and 2 grey spacers) third 2 pictures 


Step 7: Barrell

Picture of Barrell

Make (left side:6 yellow connectors. Right side: 2 yellow connectors and 7 orange connectors)

another view

Step 8: Putting It Together

Picture of Putting It Together

attach mag to barrell as shown

another view


Attatch to mag as shown

Attatch barrel to body as shown in these 2 pictures

Attatch handgrip to body as shown in these 2 pictures



attatch magpusher as shown in these 2 pictures

attatch ramming rod

attatch rubberbands as shown in these 3 pictures


Now Go Play With Your GUn just dont shoot any body in the eye with it.
 My gun sucks its almost impossible to cock.


Nathano 7 made it! (author)2015-07-13

it doesn't work

KnEx FrEaK 1 (author)Nathano 72015-07-13

Hahahhaa Ya sorry buddy. That was my very first attempt at a ones gun. I don't even know why I posted it. Go to my profile and look at me newest one. It's probobaly my best gun. (It worrks xD).

xieandy18 (author)2011-08-28

What does it shoot

KnEx FrEaK 1 (author)xieandy182012-07-16

blue rods

xieandy18 (author)2011-08-28

Do i have to make the magazine slanted?

KnEx FrEaK 1 (author)xieandy182012-07-16


beanieostrich (author)2011-05-23

Not bad 3*

Thx did u make it?


Can you popst instructions for you J.B.A.R.

Sorry mate, I cant post it because its been gone for many months now lol; it only shot 70ft. Seventy feet it horrible for a sniper lol. Thats why I have a gun called Creeping Death Mk7 that can shoot 180ft =D But I am sorry if I dissapointed you.

what sniper is it that shoots 180 ft

The Creeping Death Mk9, Mk8, and Mk7.


No problemo.

bullet tooth chris (author)2011-07-28

looks cool, the mag would just need to be a bit closer to the handle other than that it looks pretty realistic. 4*

thanks but i have a new g36c v2 and its way better

luke11wolf (author)2011-06-01


KnEx FrEaK 1 (author)luke11wolf2011-07-27

shut up

KnEx FrEaK 1 (author)2011-06-02

Im making a ak 47 it just about finished

luke11wolf (author)KnEx FrEaK 12011-07-10

i seen it.

KnEx FrEaK 1 (author)2011-07-08

my ak failed so i didnt post
and this is not worth building
i couldnt cock and i made it

luke11wolf (author)2011-06-03


KnEx FrEaK 1 (author)2011-06-02


About This Instructable



Bio: Hi im 15 and i love building with knex i am getting a lot better thanks to selezonia for posting all those instructables which gave ... More »
More by KnEx FrEaK 1:Knex Balisong (Butterfly Knife)Paper G36cKnex p90
Add instructable to: