Well, here it is! My new K'nex gun with a removable mag, rails, carrying handle/ sight, and more!
And it's also my 13th Instructable!
For no reason what-so-ever, I weighed and measured this gun. It weighs 2 pounds on the dot w/o the mag, and is 2 feet and 1 inch long
If you need any help, be sure to comment or PM me!
Edit : To avoid any further confusion, this gun does shoot. It shoots dark grey connectors around 50 feet and has removable magazines that hold around 17 rounds. You can shorten the mags, or extend them to hold more or less.
Double edit : My new computer has arrived, so I can post some pictures of my heavily modified version. Not until later today (3/21/10) I'll be able to post some. At the least.
So, without further ado, let's get started!
By the way, your welcome to make fun of my gun-naming skillz. =p
And don't forget, the stock was made 100% by Katarukito. So all credit goes to him!
Don't forget to comment and rate!
Step 1: Piece Count
Green - 122
White - 64
Blue - 16
Red - 8
Grey (black/clear recommended - 4
D. Grey - 36
L. Grey - 4
Red - 15
Green - 8
Orange - 29
Yellow - 78
Purple - 4
Blue - 2
White - 39
Red standard/micro rod - 1
Orange track splice - 7
Blue clips - 4
Blue spacer - 10
Grey spacer - 6
Y-Connector - 21
Got them yet? If so, move on to the next step!