Instructables
Hey!

This is my new (and first) k'nex lift system. I came up with this idea, because the physics teacher was showing us the effect when anything that's heavy (a hammer) hits a light - weight thing. (a small ball) So I made that system with k'nex, and this is the result.

In this lift, a rotating arm goes up, and it comes down real fast, sending the ball up the incline.

The one in the video is a bit different, the one in this Instructable is better.


Hope you guys like it.


Click here to watch the video



 
Remove these adsRemove these ads by Signing Up

Step 1: Parts List

These are all the parts you'll need to build the Hammer Lift.

Rods: 221

green-74

white-69

blue-54

yellow-21

red-9

tan rigid-1

black rigid-1

Connectors: 154

dark gray-14

light gray-13

orange-14

red-10

green-7

yellow-44

orange tube connector - 6

white-3

blue-21

purple-29

Other: 122

blue spacer-48

silver spacer-42

red gear-3     

blue/tan gear-1

small grey gear-1

tan clip-3

blue clip-15

Y clip-14

small wheel band-4

rubber band-1

chain link-7              

battery-powered motor-1

Total: 533



And,  of course, you'll need k'nex balls and tubing

Step 5: Motor

Picture of Motor
P5033201.JPG
P5033202.JPG
P5033227.JPG
P5033223.JPG
P5033228.JPG
This is a hard part to make, look closely at the quantity of spacers.
1-40 of 60Next »
This is a cool design! I have an idea that I might use to make it whack the ball even harder and up a higher track by using some of my modified motors which plug into a wall outlet and spin two to three times faster than any other knex motor! :)
dshively4 years ago
i made the project and it works great i never thought that the small engine would never pull that hammer all the way around. i wish you would show how to make the rest of the track.
RNB (author)  dshively4 years ago
I can't add a pic now, because I use the lift on a other way: as transport. The ball gets now hit by the arm, and flies 1M trough the sky, and ends up in a basket.
Can you post an instructable on how to modify that to fling the balls that far? I'm definitley going to build this and use it in the new ball machine I'm going to start tommorow! :)
RNB (author)  2007KnexpertMan3 years ago
I just see, it isn't 1 mile, it's 1 meter :-P. It's easy: Build this instructable, and don't add more track then shown in this Ible. Just cut the tubing off after the short part shown here, and let the balls fly! If you put the lfit also a bit higher up (so add a red box underneath it i.e.), it will go even further.

So, don't modify, just don't add any more rubbish after the lfit!
RNB (author)  dshively4 years ago
in the last step have I put some tips how to make the track. I think you can build your own with that.
MegaMetal83 years ago
Might build but heres 3 questions....

1. Do you have to have that pathing, can I change it to some different pathing?

2. I have the motor in the picture (Ignore ball) will it still fit in?

3. The motor isn't too powerful, does it have to be a strong motor?

Thankyou, MM8
100_0969.JPG
RNB (author)  MegaMetal83 years ago
1. It's changeable to yellow 5 - way connectors, although you'll have to find out the new height of the track.

2 + 3 Attach the motor to a white snowflake connector, and change the spacers/rod. The motor should work, cause my motor is weak too. If it doesn't work, just gear it more down. (again a blue gear on a red, you could change the red gear into a big yellow one, but the motor must be on a different place then0
MegaMetal8 RNB3 years ago
Aww man.

Don't have all the spacers :(
i have like 300 blue spacers and 400 silver spacers!
:-0
and i'm getting sick of having so many spacers...
oh
you want to buy some??
Im lright know I bought 55 blue ones and have about 65 silver
cool
RNB (author)  MegaMetal83 years ago
Try to get more ones!
MegaMetal8 RNB3 years ago
I am!
MegaMetal8 RNB3 years ago
KK will build soonish
MegaMetal83 years ago
Do you have to have the orange tubing connectors, I have none

Ps: Please reply ASAP
RNB (author)  MegaMetal83 years ago
Read 2 comments below. There's your answer :-P
MegaMetal8 RNB3 years ago
Oh yeah forgot!

Sorry
COASTER194 years ago
I decided to make this and it works great. Although I did have 1 problem with it letting only one ball in at a time.
TigerNod4 years ago
A very innovative lift design, I must say. Does it automatically reset itself too?
RNB (author)  TigerNod4 years ago
Yes. It works as long as the motor runs.
I built it and what happens is the hammer comes down but stops short of the ball, then comes down slowly. Also, the gate opener keeps breaking when the hammer lifts the thing up. Please help!
RNB (author)  Purple Waffles4 years ago
Hammer comes down but stops short of the ball??? Could you give me a picture of that, I never had that problem

Gate opener: did you make the 2nd and the 3rd picture of the last step? that should help. It works even better if you remove the blue connector and the blue and gray spacer on the white rod.

If you've more problems, tell me.
So could the track go vertical?
RNB (author)  Michaelgoode4 years ago
I never tried that one, I'm sorry.
Ok, maybe a test for me sometime
RNB (author)  RNB4 years ago
Please tell if that's possible (if you sent me pictures, I'll add them to this Instructable)
Oh, its a good design, a similar thing could be made, but the track goes vertical up?
RNB (author)  Michaelgoode4 years ago
No. Like you see in the picture, the track goes 30/35 degree up, but it has a other use: transport. Just cut the tubes off direct after the "launch" part (the part in this tutorial), and the ball flies about 1M, where it must be saved by a basket.
Is the end of the hammer really heavy, so it comes down faster?
RNB (author)  Michaelgoode4 years ago
yes, it's heavy: but not too heavy, otherwise the engine wouldn't pull it all the way up.
What makes it come down real fast? (the hammer)
RNB (author)  Michaelgoode4 years ago
Gravity :-)
Sorry but I don't have a lot of KNEX. My birthday is soon and this is number 1 on the list to make. You literly inspired me to make ball machines so you get V.I.P. on my list!
I can't make it but it looks awesome!!!
RNB (author)  Lightning Thunder4 years ago
Why can't you make it?
1-40 of 60Next »