Introduction: Knex Hidden Blade

Picture of Knex Hidden Blade

This is an Assasins creed hidden blade that is triggered by moving your hand in an upwards motion. You can use it to pretend to be Ezio etc. 

Step 1: You Will Need:

You will need:
Red / quarter - 7
Half moon - 9
Grey / two slot - 3
Tan clip - 1
Orange - 1
y clip - 1

white - 11
grey - 1
blue - 1
green 1


Step 2: Build

Picture of Build

Look at the picture. It is simple enough to build from this pic.

Step 3: Put It Together

Picture of Put It Together

1.Put the trigger on the end of the body
2.put the y clip on the end
3.Put the grey rod in the body

Step 4: Other Stuff

Picture of Other Stuff

1. Put tape on the hammer
2. Put an elastic band on it
3.Push down the hammer until the trigger stops it from coming out
4.Put on elastic bands to wear it
5.Thread string through the two grey connectors
6.Put end of string on your finger. You may need to adjust it to make sure that it is very tight
7.Pull on string with finger to use

Step 5: You're Done!

You are done!!!


dustydino (author)2014-02-23

i changed blue to white also

knexbug (author)2013-11-01

cool trigger!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

joshqua (author)2013-02-17

this is great, but i modded the blue "trigger" to a white. The blue stands out to long under a sleeve.

patriots8888 (author)2012-02-13

inside the square it says well done

TigerNod (author)2011-06-08

Although it is nicely constructed, I do not advice anyone to use this; that includes you. You seem to have used bands to keep this knife in place, and those bands seem to wrap around your arm. Not kidding here, that's dangerous. That poses a serious health risk. Your blood stream may be cut off by the rubber bands around your arm. I suggest you immediatly stop using this hidden blade until you have found another way to attach it.

the master 2 (author)TigerNod2011-06-09

I have also just realised this risk for people using tight elastic bands. I suggest that you make a knex frame or tape on a toilet roll to attach the hidden blade.

TigerNod (author)the master 22011-06-10

Yes, that would be better.

H1T4TCH1 (author)2011-04-07

'Well done!!!!!'

Thanks ;-)

fairyqueen2010 (author)2011-04-04

well i think its cool, i can tell you really worked hard "the master2"

greenguy421 (author)2011-04-04

wow. this is awesome

keir111113 (author)greenguy4212011-04-04

I agree. the master 2 is great

keir111114 (author)keir1111132011-04-04

Hey! Great instructable. Works well.

Vynash (author)2011-03-29

"Well done!!!!!" is inside :-P

It's not that bad, but you could work on it a bit :-)

the master 2 (author)Vynash2011-03-30

what could I improve?

Vynash (author)the master 22011-03-30

I'm not sure, but the only thing that I say is really on the not so good side is that the arm wraps are rubber bands, but that's just me.

~KGB~ (author)2011-03-29


the master 2 (author)~KGB~2011-03-30

what do you mean 'meh' ?

~KGB~ (author)the master 22011-03-30

its a bit basic...

About This Instructable




More by the master 2:Sound SandwichKnex Hidden Blade
Add instructable to: