Picture of Knex Hole Puncher
This is a collaboration project between Me and Hiyadudez.

P.S. If you subscribe to me, subscribe to Hiyadudez too. :-)

As you may have already noticed, it is a hole puncher.

This cool little gadget is an essential on your desk/workplace. It is a 2-holed puncher  that is activated by pushing your hand on the top, which makes 2 perfect holes in the paper. It does this with two slightly sharpened rods. Also, there's a little tray in the back which can hold stuff like business cards, pencils, rulers, scissors, or even lollipops.

Also, this was featured on Geekosystem. :-D

EDIT: This reached 4.50* And yes, I know it's 5* now, but it got to 4.5 under the old rating system.

Here's a video of the hole puncher in action:

We hope you like it!
Remove these adsRemove these ads by Signing Up

Step 1: Gather the Pieces

Picture of Gather the Pieces
Here's all of the pieces you'll need to build the 2-hole puncher.


Rods: 163

  • green- 105
  • white- 39
  • blue- 8
  • yellow- 6
  • red- 5

Connectors: 118

  • dark gray- 28 
  • light gray- 0!
  • red- 8
  • green- 4 
  • yellow- 17
  • white- 10
  • orange- 12
  • blue- 7
  • purple- 32

Other: 109

  • Hinges- 2 (4 pieces)
  • Small domes/wheels- 2
  • Blue spacer- 61
  • Silver spacer- 18
  • Y-clips- 23
  • 1 thick rubber band

End connectors: 5

  • Tan clip- 4
  • Metallic blue clip- 1

Total: 395

You'll also need something to sharpen rods, like a pencil sharpener or sandpaper.

If you have all of these pieces, then let's get crackin'!

Step 2: The Base, Part 1

Picture of The Base, Part 1
Now that you have your pieces together, you're ready to build. To start off, let's build Part 1 of the base. Make sure to place all of the pieces exactly like they are in the pictures. Also, pay attention to the image notes.

Step 3: The Base, Part 2

Picture of The Base, Part 2
This step is super easy. Just build what is in the picture.

Step 4: Combining Parts 1 and 2 of the Base

Picture of Combining Parts 1 and 2 of the Base
Now that you've built Parts 1 and 2, put them together. There should be a thin space in between the top and bottom parts. This is where the paper will slide into.
1-40 of 298Next »
Homestar5 years ago
Hey dude I'm a Christian too!
Shadowman39 (author)  Homestar5 years ago
ME TOO!!!!!
Shadowman39 (author)  www1392 years ago
Why do you reply twice to things? :-P
to make it 20% cooler.
Shadowman39 (author)  Sorunome1 year ago
That would make it 200% cooler. :-P
but that is impossible :O
me too!!!
I heard that k'nextream is too!!
Btw, 5*

Shadowman39 (author)  Homestar5 years ago
This is so cool!
Shadowman39 (author)  epicpenguin131 year ago
KILLERK5 years ago
PUNCH HOLES w/ this!

www139 KILLERK2 years ago
that [is very] funny[!]
www139 KILLERK2 years ago
james4 KILLERK5 years ago
that is plane awesomeness!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i don't really care but good eye
KILLERK james45 years ago

8) 8-) :) B) :D 8D BD ;) c(: :)
That's funny.
visit meh knex gun everyone!

lol thank u
www1392 years ago
"If you have all of these pieces, then let's get crackin'!"
how about "let's get punching"?
Shadowman39 (author)  www1392 years ago
Good one. :-P
I know! C:
:D hahahahahahahahahahahahahahahahahahaha
www1392 years ago
how do I rate? ***** man!!!!
you are awesome!!!!!!!
Shadowman39 (author)  www1392 years ago
Ratings are disabled nowadays. Thanks!
www1392 years ago
video does not exist
Shadowman39 (author)  www1392 years ago
Yeah, it was uploaded on Hiyadudez's Youtube channel, but he deleted the channel. :-(
oh. :-(
Shadowman39 (author)  www1392 years ago
He said that he made a mistake deleting it.
but why??
Shadowman39 (author)  www1392 years ago
You'll have to ask him for details, but I think he forgot that all his Knex videos were on there and thought the channel was useless.
0 light gray connectors is too much. I dont have that many.
Shadowman39 (author)  knex11111111113 years ago
That's too bad. :-(
didexo3 years ago
Bulit it!!!
1-40 of 298Next »