With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
This is a collaboration project between Me and Hiyadudez. P.S. If you subscribe to me, subscribe to Hiyadudez too. :-) As you may have already noti...
Here's all of the pieces you'll need to build the 2-hole puncher. Rods: 163 green- 105 white- 39 blue- 8 yellow- 6 red- 5 Con...
Now that you have your pieces together, you're ready to build. To start off, let's build Part 1 of the base. Make sure to place all of the pieces exac...
This step is super easy. Just build what is in the picture.
Now that you've built Parts 1 and 2, put them together. There should be a thin space in between the top and bottom parts. This is where the paper will...
Now it's time to build the back of the hole puncher. You'll need your thick rubber band in this step. Put it on exactly like it is in the pictures.
Let's combine the back to the base. Again, make sure the rubber band in your model is placed exactly like the one in the pictures.
Now that you're done with the base, you're going to build the puncher (yes, I can't think of a better name for it XD). It consists of parts A and B. G...
Now you'll combine the base and the puncher. Make sure everything is lined up. Don't put the rubber band onto the hinges yet. It may be difficult to a...
Now you'll build the bottom, part 1. It's very easy.
Now that you've built part 1 of the bottom, attach it to the model. The three y-clips will go into the slot on the blue connector (picture 3 shows thi...
Build Part 2 of the bottom. Pretty easy.
Combine Part 2 of the Bottom to the rest of the model. The 5 Y-clips are the only things that connect to anything. It rests on top of Part 1 of the Bo...
This is the tray that will hold stuff. This is an easy step.
Now you'll attach the tray to the back of the model. And you'll finally get to put the rubber band onto the hinges.
This little section will make the front of your hole puncher look and work much better.
Put the front on the model in front of the puncher.
I can't think of a better name for this, so it's called: The Orange Things. There's also the black wheels attached to white rods. This stuff is just t...
You're almost done! Just attach the Orange Things and wheels to the model.
Congrats, you are now done with our 2-hole puncher!!!! Now that you're done, you'll want to use it. So, get some paper and punch the holes in it (pict...
We have a be nice comment policy. Please be positive and constructive.
Knex Circle Machineby TitanBlue
knex gunby kneecaps
How to Make a Simple Knex Crossbowby bsandlund
knex rifleby oldsmobilefreak
Small and Powerful Knex Bowby rustymia
Really easy knex gunby hockeyfreak
Mrpowerful's Hybrid Gunby mrpowerful
K'nex Walle-Eby chinnybeer
maga mini bowby ownedintheface
imperial shotgunby ownedintheface
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »