Introduction: Knex L96A1

Another replica I made recently. I'll make instructions if people want to.
good stuff:
slingshot, decent range (just as you expect from a slingshot)
magazine
can hold magazine in the stock
looks like a l96a1
comfortable

bad stuff:
small only 1m, real one is much longer
cheek rest isn't pretty

Leave a comment please

Comments

author
MonkeyKnexer15 (author)2016-01-06

please just post the instructions of it man

author
Kona-chan (author)2014-04-20

dude post it already owo

author
Markie_9 (author)2012-06-14

will you make instructions for it?

author
sharpbike123 (author)2012-04-10

Like it very nice, slingshots are great... Just to warn everyone about other l96 snipers that use a ram, they are not powerful, for looks great for power pathetic, build this for looks and power.

author
Puddock (author)sharpbike1232012-04-20

No. Build this for power.
Build headshothoncho's L96A1 for looks and power...

author
sharpbike123 (author)Puddock2012-04-21

His wasn't powerful i built it

author
Puddock (author)sharpbike1232012-06-04

You must of made it wrong then. I've built that gun many different times and it shot farther than what he said.

author
CuddlesMcT (author)2012-02-19

This gun looks amazing, i cant wait to build it!

author
kwintisolo12234 (author)2012-02-06

5* als ik kon raten, maar dat lukt nu niet :(.

author

Hetzelfde, ik kan ook niet raten. Soms wel, vaak niet

author
mahmel (author)kwintisolo122342012-02-06

haha thanks

author
H1T4TCH1 (author)2012-01-09

Doesn't really looks like an l96 imo, if I'm honest, but I think it's still pretty nice!

author
mahmel (author)H1T4TCH12012-01-09

misshicne als-ie groen is?

author
H1T4TCH1 (author)mahmel2012-02-05

Lol geen idee hoe ik bovenstaande ooit heb kunnen zeggen xd srry man, hij lijkt best goed!

author
mahmel (author)H1T4TCH12012-02-05

haha niet erg man, thanks!

author
AUG-5OM3 (author)2012-01-17

Nice ik hoop dat je hem binnenkort post als ik hem kon raten zou ik tussen 4.0/4.5* zitten.

author
mahmel (author)AUG-5OM32012-01-17

Thanks, ik heb deze week nog veel dingen te doen dus ik denk dit weekend post ik t!

author
AUG-5OM3 (author)mahmel2012-01-18

Nicee de eerste goed uitziende sniper die niet een ton 'snowflakes' gebruikt.

en BTW je bent mn 300e comment

author
mahmel (author)AUG-5OM32012-01-18

Haha ja klopt. Wel veel gele dingetjes maar die heeft iedereen wel veel.
en gefeliciteerd haha

author
dr. richtofen (author)mahmel2012-01-18

Hey, weet je ongeveer hoeveel gele dingen en groene staafjes hierin zitten?
Kun je ook eventueel rijen van gele die binnenin zitten vervangen door rode staafjes (zie mijn G3 om te weten wat ik bedoel)
Anyway: 5*

author
mahmel (author)dr. richtofen2012-01-18

Thanks, en ik heb ook die rooie gebruikt.
Ruwe schatting, 170 gele en 300 groene

author
dr. richtofen (author)mahmel2012-01-18

Oef, ik heb denk ik maar ongeveer 100~120 gele, groen misschien nét genoeg :(

author
mahmel (author)dr. richtofen2012-01-19

dude ik weet het niet eens zeker he :o
en anders haal je die voorste loop eraf.

author
dr. richtofen (author)mahmel2012-01-19

mkay

author
TheAwesomestDude (author)2012-01-13

awesome i want it

author
Bwbt1 (author)2012-01-12

Please post by far the best looking!
Please post veruit de beste uit!
5* Im learning dutch! :)

author
mahmel (author)Bwbt12012-01-12

Dankjewel. Instructies maak ik binnekort.
Is het geen moeilijke taal om te leren?

author
Bwbt1 (author)mahmel2012-01-13

It is quite easy to learn!?

author
Raz1r Knex Bull3t (author)2012-01-12

Much, Much better.

author
beanieostrich (author)2012-01-12

Much better than the V1.

author
dr. richtofen (author)2012-01-12

Awesome die veranderingen!

author
mahmel (author)2012-01-11

Ok guys, I made a scope, bipod, front barrel, changed some things in the handle, made the thumb hole smaller and some other minor changes. I solved magazine problem, by making a layer in the scope that prevents the bullet from spraying out.
It looks very much better now. Pictures and instructables will come soon!

author
dr. richtofen (author)2012-01-06

Hij ziet er ok-ig uit, maar is niet je beste. Is het een repeterend slingshot geweer? als dat zo is kun je misschien boven de opening van het magazijn van die half ronde gele dingen maken zoals hier, en daar eventueel een scope op maken. Voor nu: 4*

author
mahmel (author)dr. richtofen2012-01-06

Ja, het vervelende daarvan is dat het er dan niet meer zo veel op lijkt. Als je er een scope opzet misschien. Ik ga wel wat uitproberen, thanks!

author
superbestknex (author)mahmel2012-01-06

instructions please

author
mahmel (author)superbestknex2012-01-07

Give me some time to make it work better, than I'll post it

author
H1T4TCH1 (author)mahmel2012-01-09

LOL, alsof 'ie z'n hand ff ophoud voor z'n baas: 'INSTRUCTIONS PLEASE' xD

author
mahmel (author)H1T4TCH12012-01-09

hahah, het is een robot

author
dr. richtofen (author)mahmel2012-01-09

lol

author
dr. richtofen (author)mahmel2012-01-06

Geen probleem

author
Dirtyboyy (author)2012-01-08

Does it fall apart when you pick it up??

author
mahmel (author)Dirtyboyy2012-01-08

No, it's bloody strong

author
Dirtyboyy (author)mahmel2012-01-09

It looks weak..

author
mahmel (author)Dirtyboyy2012-01-09

Which part?

author
Dirtyboyy (author)mahmel2012-01-09

The connection beetween body, handle and stock.

author
mahmel (author)Dirtyboyy2012-01-09

Perhaps it looks like it. It isn't irl

author
TheDunkis (author)2012-01-07

The front barrel could easily be added, did you just not have enough pieces? Not a huge deal. I like the looks of it, though it just feels off. Like, some K'nex guns from a distance with everything blurred together in vision makes them look really close but I just don't get quite the same feeling with this one, though it still looks excellent.

Anywho, here's a proposal to both fix the magazine problem -and- make the weapon a little cooler. See if you can add bolt action. Have a roof inside the gun or the magazine that traps the ammo, but then you could push a round in front of the drawn rubber band.

author
mahmel (author)TheDunkis2012-01-07

I'm not really sure what you meant with the first thing you mentioned, do you like how it looks like?

For the bolt action, I tried to make a layer of orange connectors, 3 pieces wide, within the middle row a hole, so the ammo can get trough, up to the ratchet. It would be pushed by a rubber band, and you have to pull them back (the bolt action) per shot.
It isn't probably clear, tomorrow i'll post a pic

author
mahmel (author)mahmel2012-01-07

The point was, the ratchet made it unable to put that in the gun. Besides, you also have to pull the rubber band back, and pull the bolt back.

author
pinderfish (author)2012-01-06

actually, I quite like it! even though it has some major parts missing I think it still looks quite nice! I like it 5* by the way you could probably make a removable barrel to slide over the working mech, for when you want it for looks anyway.

About This Instructable

2,178views

3favorites

License:

More by mahmel:Knex L96A1Knex Barret 50 cal.Barret 50. cal
Add instructable to: