Introduction: Knex Longsword(BUILD)

Picture of Knex Longsword(BUILD)

My knex longsword. Last time I made an Instructable it was just a concept. Now, I'm making full instructions.

Step 1: Parts

Rods:
4 green/grey
6 orange/yellow
2 blue/purple

Connectors:
8 orange
6 yellow
5 white(snowflake)
1 Tan 1 side connector

Separators:
1 grey
2 blue

Step 2: Handle

Picture of Handle

Handle, Should be able to build from picture.

Step 3: Lower Blade

Picture of Lower Blade

2 of your green rods, 2 orange connectors, one snowflake(white), And 5 yellow. Still easy, Right?

Step 4: Upper Blade

Picture of Upper Blade

Just follow the pictures if you can

Step 5: Extra Pieces

Put one orange connector on the green/grey rod
Rest of orange connectors will be seen in next step

Step 6: Putting It All Together!

Picture of Putting It All Together!

Here, You can probably figure it out from here. End picture is extra piece as a grey rod instead of green with an extra orange piece on the handle end of it

Comments

Linkin_J_Knex (author)2016-09-18

cool sword:)

tomatoskins (author)2016-09-14

Cool long sword! Thanks for sharing!

tinyhooman (author)tomatoskins2016-09-16

No, thank you for commntomg

About This Instructable

91views

0favorites

Bio: I like to make knex guns, swords, and medieval artillery, I sometimes draw, play music, and Mod nerf guns.
More by tinyhooman:My Nerf Modulus LoadoutHow to Fix Old/broken/stepped on Nerf Darts.Knex Gun Guide 2016!
Add instructable to: