Introduction: K'nex - M14 Instructions

Hey guys, and today for fans of the M14, I bring you instructions for the M14 that I reviewed back in September 2013. This is the second time that instructions have been made for a K'nex M14 on Instructables.


Good Points

· Good Iron Sights

· Comfortable Hand Grip

· Very Realistic

· The Magazine Is Removable (Go To Step 8)


Bad Points

· Use Quite A Lot Of Cut Pieces (See Parts List)

· The Whole Gun Is Slightly Flimsy

· Doesn't Shoot Because It's Just A Model


Also check out my other creations and instructions

https://www.instructables.com/id/Knex-1975-CZ-75-Instructions/

https://www.instructables.com/id/Knex-Biplane-Instructions/

https://www.instructables.com/id/Knex-1976-MP5K-Instructions/

https://www.instructables.com/id/My-Knex-Weapons-Of-2013-2014/

https://www.instructables.com/id/Knex-James-Bond-Helicopter-With-Saws/

https://www.instructables.com/id/Knex-1979-SPAS-12-Instructions/

https://www.instructables.com/id/Knex-Galvaknuckles-Instructions/

Step 1: Parts List

If you have any trouble or need more pictures just leave a comment and I will get back you ASAP. I strongly advised you to collect all the pieces before you start building. Also I have added a few notes throughout instructable this to make it more easier to understand something if you run into any difficulty.

Green Rods - 339

Green Rods - (see step 8) - 2

White Rods - 203

Blue Rods - 28

Yellow Rods - 2

Red Rods - 2

Green Connectors - 14

White Connectors - 29

Blue Connectors - 18

Yellow Connectors - 154

Red Connectors - 30

Light Grey Connectors - 19

Dark Grey Connectors - 50

Orange Connectors - 101

Tan Connectors - 2

Tan Connectors - (with the little tab cut off) - 7

Y Shape Black Connectors - 10

Orange 86mm Flexy Rod - 2

Red Connector - (cut, see step 5) - 3

Orange Connector - (cut, see step 5 and 6) - 2

1.9cm cut Rods - 10

3.1cm cut Rods - 9

Blue Spacer - 22

Push On Grey Gear - 2

Rubber Bands - 4

Total - 1067

Step 2: Stock

Step 3: Hinged Shoulder Rest

You don't have to do this step

Step 4: Trigger & Magazine Well

Step 5: Barrrel Part I

Step 6: Barrel Part II

Step 7: Magazine

Step 8: Alternative Magazine

Step 9: Barrel Fix & Stock Part III

Step 10: Done

Well done you made it to the end, I do hope you have enjoyed building it.

Zombie Quotes About The M14

"I'm gonna teach those slack jawed flesh junkies a lesson"

"Let's turn those rotten empty heads inside out"

"This is a rifle, not just a gun. I use it to kill and it's so much fun"

Thanks for building it, please leave a comment in the box below and subscribe

Comments

author
CorgiCritter made it! (author)2015-02-14

Great instructions for a great gun! Very clear and well done. Perhaps I will build it one day if I ever get more knex. I remember the day when I wanted to build Red's from his internal pics, (I wanted it to shoot) and then I came over here and found the parts list and discovered I didn't have nearly enough orange cons. Might be able to build it if I leave off some stuff.

author
Zombiekiller-93 made it! (author)Zombiekiller-932015-02-14

Thanks Corgi, I buy all my K'nex from this website

http://www.knexusergroup.org.uk/acatalog/knex-parts-classic.html

author
CorgiCritter made it! (author)CorgiCritter2015-02-14

I have seen the site for the USA before, and for most of the parts you can only get from Knex.com. But yeah, it seems you can get most parts in the UK from the user group.

author
hunter999 made it! (author)2014-04-27

Good to see instructions for this! :D

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-27

Thanks Hunter

author
The Red Book of Westmarch made it! (author)2014-04-17

This looks pretty nice, but my latest M14 is much more accurate looking, and more reliable when it comes to shooting: https://www.instructables.com/community/KNEX-M14-T4...

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-17

Thanks Red, I have look at it before and it looks good. To be fair, we have both have made two very good M14's with differences :)

author

That is true, to a certain extent, but since I made both of them, I prefer the latter as opposed to the former.... XD

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-18

Yes, technically this is your M14 as I did build it from your internal pictures. In May i will be posting the Dragunov review and also I will be reviewing the KAP-40 that month, since you ask me back in August 2013 to review it.

author

I was just giving you a hard time, bro, no biggie. =D

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-19

So you not excited about the Dragunov and KAP-40 Review

author

Sure I'm excited!

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-21

Good, I'm glad to hear that :)

author
sandroknexmaster made it! (author)2014-04-18

Looks epic!

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-18

Thanks Sand

author
akshat21045 made it! (author)2014-04-17

It is 'kewl' man!

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-17

Thanks Akshat, I had to look up what the meaning was for kewl

author
akshat21045 made it! (author)akshat210452014-04-17

LOL. I thought you know what was meant by 'kewl'. What did the meaning say?

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-17

It's a another way of saying "cool"

author
akshat21045 made it! (author)akshat210452014-04-17

Yep, that's what I meant.

author
Zombiekiller-93 made it! (author)Zombiekiller-932014-04-17

Thanks anyway

About This Instructable

1,994views

11favorites

License:

Bio: Hello there I'm Zombiekiller-93 but me can call me Jay. I like making models of K'nex guns from the Call Of Duty games ... More »
More by Zombiekiller-93:K'nex - 1975 CZ-75 InstructionsK'nex - Biplane InstructionsK'nex - 1976 MP5K Instructions
Add instructable to: