Introduction: K'nex M3 Grease Gun
M3 (grease gun)
Used by The Allied Forces in WWII and the Americans in the Vietnam war.
My first K'nex gun with mag.
God only knows which jarhead designed this gun but still im making it b'cause its popular.
K'nex version, detacheble mag, real trigger, bolt action:
(fire, pull, fire, pull..........)
10 round detacheble mag,
Shoots little green rods,
Mag. attacheble and detacheble,
Reloads real easily (5 seconds reload)
Can shoot up to 10 ft. depending on enviroment issues,
Is worth building.
Reloading THE MAG (putting the bullts in) takes a while,
Gets jammed very RARELY,
You need to break a dark grey connector (i already broke it when i put on too many lastics on it [DO NOT TRY!!])
Stock isn't very attractive.
Step 1: Body
Step 2: Handle
Step 3: Trigger
Step 4: Firing Pin / Pusher
Step 5: Mag.
10 round mag.
Step 6: *Optional* Stock
Step 7: Pull, Fire
Should click twice when firing pin is pulled: the first is the bullet entering the chamber, the second is the trigger going in place.
If the gun does not fire pull the firing pin all the way ( not out ) push the magazine pusher in ( happens alot when weak or old lastic is used ) and try again.
We have a be nice policy.
Please be positive and constructive.