Introduction: Knex M4/AR15 Version 2

Okay first I would like to give credit to Oblivitous for the barrel design. But I was tired of looking at awful replicas of the famous M4. So i decided I was going to totally reconstruct my previous design and actually make it look like an M4. AS FOR BLUE MULLET use this as an good example of an M4. BTW yes this does fire. It fires blue rods and gets up to about 35-45ft. I just took the ram and rubber bands off so you can get a clear view of the gun. For real though, compare it to the picture in this ible that I built it from, and you'll see that it looks a lot like it. Although that grip was added by me. Enjoy.


REMEMBER TO RATE, COMMENT, AND SUBSCRIBE

ALSO PLEASE VOTE FOR ME IN THE LAUNCH IT CONTEST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

CHECK OUT VERSION 3:https://www.instructables.com/id/Knex-M4A1-V3/

Comments

author
Lucas The Boss made it! (author)2013-12-24

Looks good the handle just needs some more angle to it overall great gun

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2013-12-24

This was posted like 2 years ago....

author
Raz1r Knex Bull3t made it! (author)2013-07-11

Yep, I know. Lol, I eventually ended up making a much better one later though.

author
PotatoCoffee made it! (author)2012-08-23

The handle should be more slanted. Otherwise it looks good!

author
knex builder. made it! (author)2012-07-24

this is better than your new one

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2012-07-27

Lol. My newest one is waaaayyyyy better. Plus, I'm coming out with a version 4 that nails the design in the picture.

author
knex builder. made it! (author)knex builder.2012-07-28

I saw v1

author
Raz1r Knex Bull3t made it! (author)2012-07-02

Don't look at this one, look at my newest M4A1.

author
Puddock made it! (author)2011-12-04

Dude, this is incredible. Sometimes I wish that you posted instructions for this gun.

author
dr. richtofen made it! (author)2011-08-23

looks very good!

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-08-23

Thanks, also you're my 900th commentor.

author
dr. richtofen made it! (author)dr. richtofen2011-08-23

np

author
beanieostrich made it! (author)2011-07-22

This looks great =D I like the fact that it has a pin guide =D And the heartbeat sensor is a nice bonus =D 4.5*

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Thank you!

author
beanieostrich made it! (author)beanieostrich2011-07-22

No problem =D Im making a Secret shottie.

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-25

Vote for me in the launch it contest please!

author
beanieostrich made it! (author)beanieostrich2011-07-25

Yes sir =D

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-25

Thank you!

author
beanieostrich made it! (author)beanieostrich2011-07-25

No problem man =D Wanna see the secret shottie?

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-26

Sure!

author
beanieostrich made it! (author)beanieostrich2011-07-26

Heres the shottie =D

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Cool! =D

author
beanieostrich made it! (author)beanieostrich2011-07-22

I can tell you one thing though its 9 layers thick lol. And the mag is 5 layers lol. Ill post when I find my camera =D

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Now that's a thick gun. *__*

author
beanieostrich made it! (author)beanieostrich2011-07-22

I know right? Just out of curiosity, do Oblivitus's or KnexFreek's mag fed shotguns have removable mags?

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Not that I know of.

author
beanieostrich made it! (author)beanieostrich2011-07-22

I just checked and the mags are not removable lol. But they are great guns though =D You build great stuff =D

author
~KGB~ made it! (author)2011-07-22

looks nice =D

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-25

Vote for me in the launch it contest please!

author
~KGB~ made it! (author)~KGB~2011-07-26

ok

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Thanks! I was just tired of looking at awful replicas of the M4 like Blue Mullet's. So I decided to build it almost exactley like the real thing

author
~KGB~ made it! (author)~KGB~2011-07-22

lol, true, good job! =D

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Thanks, BTW nice avatar. =D

author
~KGB~ made it! (author)~KGB~2011-07-23

no prob! lol, hammer and sickle =D

author
tubanator-2.0 made it! (author)2011-07-23

Ehhhhh looks ok..

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-24

What do you mean by it looks 'ok' . Have you compared it to the picture. Have you seen the other awful designs of the M4 on instructables? If mine is just ok why don't you build one better than mine.

author
tubanator-2.0 made it! (author)tubanator-2.02011-07-24

I mean its not bad but its nothing to special either and yes and the front portion looks pretty good but the rest is a bit iffy. and yes i've seen most of them lol but i have also seen the good ones aswell. but if you wanted to make this really good id say get the mag well up to the edge more like move it over and perhaps change the handle angle? and ive built an m16a4/a2 thats pretty darn good wouldnt take much to make it an m4 lol ill try when after i post my latest gun.

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-25

Vote for me in the launch it contest please!

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-24

I've fixed the mag problem. The handle angle is actually exact on so I'm not changing that, but I'll see if I can get where the handle meets the stock looking different as well as the top rail. BTW I looked at your M16 and i think it needs some work as well no offense. I think I'm going to change the gun up a bunch so expect new pictures if i get it looking right.

author
tubanator-2.0 made it! (author)tubanator-2.02011-07-24

Sounds good it should look pretty darn good after that i'll be sure to check it out when theyre up. and yea it definitely wasn't perfect in some spots may i ask where in specific? cause i made another m4 sort of gun that id use if i tryed for an m4.

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-24

Mostly the rail, mag, handle, and barrel. Also a little of the stock.

author
apples!!!!! made it! (author)2011-07-22

Looks very promising; it's a bit off, though.

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-25

Vote for me in the launch it contest please!

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-22

Okay, could you tell me what's off because I'd like to improve it. I appreciate constructive criticism, as it can be helpful to me in the future. =D

author
apples!!!!! made it! (author)apples!!!!!2011-07-22

Alright, well the receiver looks a bit blocky toward the front of the gun, and the area where the stock meets the body/handle isn't the same. The stock area is also much, much larger than it is on the actual weapon. It's just a few small visual defects that can be easily fixed, no worries :)

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-23

Thank you so much for telling me that. I did think myself that where the handle and stock meet didn't look right and I actually have an idea to fix it. I think I have an idea about the mag? BTW I fired the gun last night and I couldn't believe how powerful the shot was. It went straight through cardboard about five feet away with four 64's on the gun. Also thanks for the constructive criticism. =D

author
apples!!!!! made it! (author)apples!!!!!2011-07-23

No problem haha, thanks for accepting it and making the best of it. It should be pretty easy to fix, because you have a good, solid base to it. I look forward to seeing the final product!

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-23

Lol, thanks. I'll see if I can get started on it now. I might have to do housework first. : (

author
apples!!!!! made it! (author)apples!!!!!2011-07-23

Well, there's no rush. Take care of what you need to do and enjoy the time you have afterwards!

author
Raz1r Knex Bull3t made it! (author)Raz1r Knex Bull3t2011-07-23

Dang! i tried making the adjustments but it just weakened the gun's design. I needed the gun to be sturdy so I switched it back to it's original form but made the stock a bit longer for comfort. Don't you think it looks like the gun just how it is? : (

About This Instructable

1,547views

1favorite

License:

Bio: "For God so loved the world that he gave his one and only son, that who ever believes in him shall not parish but have ... More »
More by Raz1r Knex Bull3t:Knex Zaktangle: ZKAR V3Knex Pump-Action RifleKnex Assassin's Creed Hidden Blade (Instructions)
Add instructable to: