Based on the Mini-Uzi.

Simple, easy to build knex gun based on the Mini-Uzi. This gun fires white rods and has a working magazine.

Magazine + Magazine ram
Forward grip

Magazine ram
Remove these adsRemove these ads by Signing Up

Step 1: Barrel/Breech

Build the barrel and breech.

Build all the parts first, then assemble as shown in the last three images.

The update is on the fifth image

Step 5: Magazine + Magazine ram

This part is trickier. Look carefully at the pictures. The second and third pictures show close ups of parts.

NOTE: The second picture shows what the two black and white things are in the forth picture. (Top, center)

Updates are shown in the last three pictures

Step 6: Forward grip

Picture of Forward grip
This is another really easy part. Just look at the picture.

I know that actual mini uzi's don't have handles like this but it just makes it easier to aim.

Step 7: Assembly

Assembly of the gun. Bringing all of the pieces together. Follow the pictures.

Step 8: You're done!

Hopefully you've made the gun and it works fine.
And hopefully. you haven't gotten stuck or confused. If you have, just let me know and i'll give you a hand .
1-40 of 120Next »
i just sharted
u really think we need yo know this?????????!!!!!!!!!
Lemony lemony, oh, lemony, oh lemony. Ahhh, lemony.
poellmac4 years ago
what does it shoot
That mod is a load of crepe.
Canadian pancake?
i built it a few years back, and ill give you a 3.5 out of 5. i love the looks but i only got it to fire a few times because of the jamming.
TigerNod4 years ago
That's an awesome uzi. 4.0.
Looks great, I've been looking for a good uzi and I think I found what I was looking for :)   5 stars
coolin5 years ago
knexsniper15 years ago
what is the range?
wow your all abiut range arent ya?
I can't get the mag to work. It feeds into the gun before the trigger, so the ram is blocking the bullets. Is this supposed to happen?
lioneatr5 years ago
i just built! I made the gun , the sight, and the barrel extension ! cant get it to shoot though
Knex UZI i modded
where the barrel accually is i had to 6ake a load of the other knex away from it so it would fire i will send u the link to my 1
zzpman5 years ago
Can you make step 1 less confusing
PindaHoofd5 years ago
Can I replace that round thingy which is connected on the white round connector on the right?
i built ur gun no problems but!!!! when you pull back do u have to do it so the bullet comes up then fire OH and when i go to fire it slows down in the barrel or gets stuck please tell me whats wrong or show me what you would do to fix it
how much v connectors are there i really wanna make
the ma is flord
FrOnTLiNe6 years ago
Pretty sweet.
why put the extra sight on? im not dissing it im just wondering i like the barrel extention though, it looks like a silencer
skatejon6 years ago
i dont mean to be me at all but this is pretty bad with 2 #64 bands i got about 3 feet. i dont know if i made it incorrectly or something.
barrax skatejon6 years ago
i had a pack of 459 proper elastic bands (thin though). one was half the size and half the thickness, thats why i didn't count it. i tried to pull it once, and it snapped after 3 cm.
If that would happen then... that gun would... you know... suck.
at least it kind of looks cool
i think you made it wrong - mine shot at least 20 (30ft) with one loose #64.
Yeah, he probably did make it wrong. That range is just impossible. Or he hasn't got strong bands!!!
20/30 feet is not very far
but it's a lot better than 3 ft. from 2.
statified6 years ago
ill probably make this with decapitated greys as opposed to tan locks.
That's cheating you know! That is not cool. I always rate the guns with modded parts 0.5 stars.
i guess so but i already have them so may as well make use of them.
deawon26 years ago
hey DuOslug could you please make the assembly a little easier to follow plz
Guardians386 years ago
amtdude6 years ago
can you post the atachable sight and barel extention next time you update it
1-40 of 120Next »