Introduction: Knex Mini-uzi - - Updated V1.2 - -
Based on the Mini-Uzi.
Simple, easy to build knex gun based on the Mini-Uzi. This gun fires white rods and has a working magazine.
Parts:
Barrel/Breech
Magazine + Magazine ram
Ram
Trigger
Body/handle
Forward grip
UPDATES:
Magazine ram
Ram
Trigger
Barrel/Breech
Body/handle
Step 1: Barrel/Breech
Build the barrel and breech.
Build all the parts first, then assemble as shown in the last three images.
The update is on the fifth image
Step 2: Body and Handle
This is one of the easiest parts of the gun. Just look at the pictures.
Step 3: Ram
This is the easiest part of the gun.
NOTE: The bands go through the hole in the middle - bands must be snapped, fed through hole and then re-tied.
Step 4: Trigger
Another easy part.
Update is third image
Step 5: Magazine + Magazine Ram
This part is trickier. Look carefully at the pictures. The second and third pictures show close ups of parts.
NOTE: The second picture shows what the two black and white things are in the forth picture. (Top, center)
Updates are shown in the last three pictures
Step 6: Forward Grip
This is another really easy part. Just look at the picture.
I know that actual mini uzi's don't have handles like this but it just makes it easier to aim.
Step 7: Assembly
Assembly of the gun. Bringing all of the pieces together. Follow the pictures.
Step 8: You're Done!
Hopefully you've made the gun and it works fine.
And hopefully. you haven't gotten stuck or confused. If you have, just let me know and i'll give you a hand .