Instructables
loading
loading
Picture of Knex Mini-uzi  - - Updated V1.2 - -
DSCF2607.JPG
DSCF2594.JPG
DSCF2541.JPG
DSCF2543.JPG
Based on the Mini-Uzi.

Simple, easy to build knex gun based on the Mini-Uzi. This gun fires white rods and has a working magazine.

Parts:
Barrel/Breech
Magazine + Magazine ram
Ram
Trigger
Body/handle
Forward grip

UPDATES:
Magazine ram
Ram
Trigger
Barrel/Breech
Body/handle
 
Remove these adsRemove these ads by Signing Up

Step 1: Barrel/Breech

Build the barrel and breech.

Build all the parts first, then assemble as shown in the last three images.

The update is on the fifth image

Step 2: Body and Handle

Picture of Body and Handle
DSCF2611.JPG
DSCF2557.JPG
DSCF2558.JPG
This is one of the easiest parts of the gun. Just look at the pictures.

Step 3: Ram

Picture of Ram
DSCF2613.JPG
DSCF2614.JPG
This is the easiest part of the gun.

NOTE: The bands go through the hole in the middle - bands must be snapped, fed through hole and then re-tied.

Step 4: Trigger

Picture of Trigger
DSCF2559.JPG
DSCF2615.JPG
Another easy part.

Update is third image

Step 5: Magazine + Magazine ram

This part is trickier. Look carefully at the pictures. The second and third pictures show close ups of parts.

NOTE: The second picture shows what the two black and white things are in the forth picture. (Top, center)

Updates are shown in the last three pictures

Step 6: Forward grip

Picture of Forward grip
This is another really easy part. Just look at the picture.

I know that actual mini uzi's don't have handles like this but it just makes it easier to aim.

Step 7: Assembly

Assembly of the gun. Bringing all of the pieces together. Follow the pictures.

Step 8: You're done!

Picture of You're done!
Hopefully you've made the gun and it works fine.
And hopefully. you haven't gotten stuck or confused. If you have, just let me know and i'll give you a hand .