This is my knex monstertruck that i made a few years ago and was going to post on my old acccount but never got around to it. So now i have some spare time i will post. First off it has suspension (although it is prone to breaking if dropped), working stearing and the bonnet copens to reveal an engine(just for show). The doors can open and a knex man can fit inside but this is mainly model is mainly for show.
These pictures are quite old so some may be missing or be bad photos.
So here are the pics so get making!!
And be sure to rate, comment, subscribe and be sure to check out my other creations.
These pictures are quite old so some may be missing or be bad photos.
So here are the pics so get making!!
And be sure to rate, comment, subscribe and be sure to check out my other creations.
Remove these ads by
Signing UpStep 1: Base
This is the base and suspension
1-make this
2-make
4-make
6-make
7-attach 1 to 2
8-attach 4 to 7
9-attach 6 to 8
(make 2)
10,11,12-make these
13-attach 11 to 12
14,15-attach 10 to 13
16,17,18-add this
19,20,21-add the lacky band here
22,23,24,25,26-add wheel
27,28-done
29-a full picture of the steering
30,31-better pictures of rear (or front if you dont want it to turn)
1-make this
2-make
4-make
6-make
7-attach 1 to 2
8-attach 4 to 7
9-attach 6 to 8
(make 2)
10,11,12-make these
13-attach 11 to 12
14,15-attach 10 to 13
16,17,18-add this
19,20,21-add the lacky band here
22,23,24,25,26-add wheel
27,28-done
29-a full picture of the steering
30,31-better pictures of rear (or front if you dont want it to turn)
Flag this comment as:
Not NiceInappropriateSpam
1
-Knexchaos-
says:
Jan 4, 2012. 9:47 AMReply
Epic! I made this and had a derby with my friend and mine only broke once and it was a quick fix. Very sturdy
2
KNEX-pert
says:
Dec 25, 2011. 4:55 PMReply
AWESOME! That monster truck is very strong, big, and cool! Great job!
7
knex vehicle builder 00
says:
Dec 22, 2011. 9:47 PMReply
great job. the looks are good, but im even more impressed by the suspension and the creativity and neatness. 5* keep up the good work
2
mulletman6
says:
Nov 21, 2011. 2:46 PMReply
Tried making it, but couldn't get the suspension to work properly, so gave up
7
White Shadow (author)
in reply to Nov 21, 2011. 3:48 PMReply
Sorry the pictures are a bit hard to follow but if u look at them carefully then you should be able to make it.
2
mulletman6
in reply to Nov 22, 2011. 2:42 AMReply
I had the whole of the chassis built, but when i pushed down on it, the suspension didn't work as the top bit and bottom parts just pushed against each other :/
7
White Shadow (author)
in reply to Nov 22, 2011. 3:07 AMReply
Well i havnt had this built fotr well over 2 years so i cant realy check whats happening. Just remake the suspension again and sorry i couldnt help much.
2
mulletman6
says:
Nov 21, 2011. 2:56 AMReply
Going to attempt to make this later :)
2
zap8005
says:
Nov 21, 2011. 1:50 AMReply
put a 3-barreled Gatling gun with 2 triangular shields attached on the back & BAM! you have a halo warthog
Visit Our Store »
Go Pro Today »
