Introduction: K'nex Motor (Touch Mode)

Picture of K'nex Motor (Touch Mode)

Ever felt bored while repeatedly turning on/off the motor? Ever got fed up with pushing the tiny switch? Ever wanted to make a project involving turning a motor on/off that was reliable? Simple. Modify your motor!

Note: No actual modifications have been made to the mechanism of the motor. Repetitive presses should be avoided. Cheese is awesome.

Ready? Let's start!

Step 1: Parts List

Picture of Parts List

Not much, just a motor and a standard (-) screwdriver.

Step 2: Touch-Sensitising

Picture of Touch-Sensitising

Simply loosen the screw that holds thee batteries in, until the motor can be started by applying pressure to the cover, but ceases motion after releasing it.

Be sure to flick the switch in the direction you want.

Step 3: Done!

Picture of Done!

That's all! While this isn't really hard to do, I made an Instructable since I hadn't seen it anywhere else. If anyone uses it, please send me a picture!

Also, keep an eye out for my upcoming ball machine, Helios.

Comments

parshan (author)2017-10-11

And please, no comments about my nails.

About This Instructable

84views

1favorite

License:

Bio: Finally back, this time with my new Ball Machine, Helios! If you like it, thanks! Otherwise, thanks anyways for knowing what it is!
More by parshan:K'nex Ball Machine - HeliosK'nex BM Element - 2x2 DropperK'nex Motor (Touch Mode)
Add instructable to: