Introduction: Knex NERF Sniper Bi-pod

Picture of Knex NERF Sniper Bi-pod

Step 1: Pieces

Picture of Pieces

4 white connectors
8 white rods
6 green rods
4 gray rods
6 black connectors
4 light grey connectors
8 purple/dark grey connectors
2 red connectors

Step 2: Starting

Picture of Starting

Get two white rods and put one black connector in the middle on each one

Step 3:

Picture of

Put the two red connectors on the black connectors

Step 4:

Picture of

Now put a white rod in the middle of the connector and connect both

Step 5:

Picture of

Add the rest of the black connectors on each rod

Step 6:

Picture of

Add the white connectors

Step 7:

Picture of

Put the white rods on both sides and put it the same place as the middle one

Step 8:

Picture of

Add to green rods on each side in the middle

Step 9:

Picture of

Add the rest of the green rods

Step 10:

Picture of

Add the whit rod one both sides by the green rods

Step 11:

Picture of

Flip it upside down and do the same

Step 12:

Picture of

Add the grey rods on the green rod side

Step 13:

Picture of

Add the dark grey/purple connectors like that on the other grey rods as well and push them to the bottom

Step 14:

Picture of

Get four more and add them to the top

Step 15:

Picture of

Add the light grey connectors like so.

Step 16: FINISH

Picture of FINISH

Now you are complete

Step 17:

Picture of

I put it on my nerf sniper rifle on the bottom railings. Hope this instructable helped. Thanks!

Comments

sandroknexmaster (author)2014-07-15

Nice!

nerfrocketeer (author)2014-07-14

Nice tac rail design!

potato1510 (author)2014-07-12

Danke

Masterbuilder214 (author)2014-07-12

Really nice!

About This Instructable

604views

5favorites

License:

More by potato1510:Knex NERF Sniper Bi-podLego Folding Gun
Add instructable to: