Knex PP19 "Bizon"

*EDIT, this gun reached 4.14 and was #7 highests rated knex gun.*

Well here it is, my long awaited (not really) PP19 instructable. I believe that this is the first PP19 replica to be posted. This is also my Xmas present to you guys, I am just posting this a bit earlier so it gets the attention that it deserves.
This is my first successful replica, also it is as close to the real gun as I could manage.

Some stats:
Ammo - Blue rods
Mech - Pin mech
Mag capacity - up to 9 shots

Some of its cool features:
Removable stock
breach loaded shell ammo

Well let's get building!

Remove these ads by Signing Up

Step 1: The Stock and Pin

After you have built these put them to the side until later on.

The Red Book of Westmarch says: Oct 25, 2012. 7:56 AM

Nice job bro! This gun seems to work for you, though, I'm not a big fan of shell ejecting guns...

rheath2 says: Jan 30, 2012. 4:38 PM

Incredible!!!!!!!!!!!!!

rheath2 in reply to rheath2Feb 3, 2012. 6:28 PM

CuddlesMcT says: Aug 1, 2011. 9:36 PM

Does the ram stick out of the back and stop you from using the stock?

CuddlesMcT in reply to CuddlesMcTAug 2, 2011. 12:31 AM

built it. its one of the most fun guns ive played with for a while! since The Dunkis' UMP :) 5*

Fred the Penguin (author) in reply to CuddlesMcTAug 2, 2011. 9:32 PM

thanks, I made an updated version with a removable mag and fake charging handle which was even more fun to screw around with but it is long gone

AUG-5OM3 says: Jul 19, 2011. 8:40 AM

Can you explain a litlle better (no offense) how the shell ejection works and how the ammo is made? Since the video is gone..... Thanks

Fred the Penguin (author) in reply to AUG-5OM3Jul 19, 2011. 4:56 PM

the gun does not repeat with "shell" ammo. A white rod goes in then grey connector. round end facing the pin. the two are not connected. when fired the grey connector should fly out of the breech and the white rod should be shot out.

AUG-5OM3 in reply to Fred the PenguinJul 20, 2011. 2:54 AM

Ah okay well thanks, great gun, and now the ejection works it's even better. 5* and faved

knexinventer says: Jul 17, 2011. 9:39 PM

i just finnished it and it is cool

Fred the Penguin (author) in reply to knexinventerJul 18, 2011. 4:11 AM

thanks. see if you can build the remake I did from these pix

knex_mepalm says: Feb 26, 2010. 2:45 AM

aWESOME, BTW ARE YOU BRITISH? I love the shell eject!

Fred the Penguin (author) in reply to knex_mepalmMar 20, 2010. 7:42 PM

New Zealander actually.

SomeAsianKid in reply to Fred the PenguinJul 6, 2011. 11:46 PM

You're in Eastern too? Im in Australia and guess what race i am ??? (Asian *echo*)

Fred the Penguin (author) in reply to SomeAsianKidJul 7, 2011. 3:49 PM

I'm a penguin.

RMConstruction in reply to knex_mepalmMar 18, 2010. 2:41 PM

(removed by author or community request)

Fred the Penguin (author) in reply to RMConstructionMar 20, 2010. 7:44 PM

I have never been so insulted in my life! An aussie, really, I'm from New Zealand thank you very much!

RMConstruction in reply to Fred the PenguinMar 21, 2010. 2:33 AM

My heartful apologies, i have never been very good with accents.

Sorry...

SomeAsianKid says: Jul 6, 2011. 10:51 PM

the 5th-7th photoes are such a pain in the hands >_>

muffinslayer2 says: Jun 25, 2011. 6:17 PM

Why did the video get removed? And how do you make the shells

Fred the Penguin (author) in reply to muffinslayer2Jun 26, 2011. 11:37 PM

black ops > knex.

white rod then grey connector

muffinslayer2 in reply to Fred the PenguinJun 28, 2011. 1:14 PM

Only 1 grey connector? and is it clipped on the middle part i'm assuming?

Fred the Penguin (author) in reply to muffinslayer2Jun 28, 2011. 10:25 PM

no, white rod goes in then grey connector. round end facing the pin. not connected.

muffinslayer2 in reply to Fred the PenguinJun 29, 2011. 12:56 PM

Thanks.

SomeAsianKid says: Apr 11, 2011. 11:18 PM

did you put the mag where its supposed to be?

Fred the Penguin (author) in reply to SomeAsianKidApr 16, 2011. 3:33 AM

the actual mag is positioned where the bullets feed into the gun, the cylidrical mag on the real gun is impossible to replicate with knex on the proper scale, therefore the fake mag is positioned pretty much where the mag is on the actal gun

so basicly yes it is

geodez in reply to Fred the PenguinMay 7, 2011. 7:45 AM

Not quite, the Bizon 2-07 (chambered in 7.62x25 Tokarev,) dispensed with the helical magazine in favor of a 35 round staggered column box magazine.

Fred the Penguin (author) in reply to geodezMay 20, 2011. 1:00 AM

yes but the gun looses its flair if you build it with a box mag. I rebuilt it today and gave it a removable mag, the fake mag is attached to the real one .

geodez in reply to Fred the PenguinMay 21, 2011. 12:59 PM

This version (the one that is already posted) has an inbuilt box magazine.

SomeAsianKid in reply to Fred the PenguinMay 20, 2011. 2:02 AM

Post the new one O_O

Fred the Penguin (author) in reply to SomeAsianKidMay 20, 2011. 3:01 AM

still not done

SomeAsianKid in reply to Fred the PenguinApr 16, 2011. 2:04 PM

I have an idea of how the foregrip/mag can be used and it IS possible but it wont be removable :L

Fred the Penguin (author) in reply to SomeAsianKidMay 20, 2011. 12:57 AM

remade it with a removable mag

Lowney says: Apr 24, 2011. 4:03 AM

Is this from Killzone? Or an actual gun? :P

Pizzapie500 says: Jan 22, 2010. 4:45 AM

Does this use any broken pieces?

cool bas3 in reply to Pizzapie500Jan 29, 2010. 2:45 AM

yes,it use one broken orange connector.
one broken white rod.
and one broken green rod

kwintisolo12234 in reply to cool bas3Apr 5, 2011. 8:00 AM

FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU...