Instructables

Have you ever needed a case for your PSP? Do you have some K'nex laying around? Then this is project for you! The case can hold your PSP(Slim, but I don't know if the others will work. Please let me know if they do.) and two games. It also includes a handle, and a case lock. Don't forget to rate, comment, and subscribe. Well stop reading this and get building.

Well I decided to make a piece count for everyone who wanted to build this so here it is:

Connectors
Gray(1 Slot)=10
Red(3 Slot)=9
Yellow(5 Slot)=16
Purple 3D=24
Blue 3D=4
White(8 Slot)=24

Rods
Green(Approximately)=54
White=31
Gray=1

Miscellaneous
Y Connectors=4
Blue Spacers=2
Gray spacers=13
Tan Clips=6
Blue Clips=4
Hinges= 2 Sets
Green rod normal to micro size=2





 
Remove these adsRemove these ads by Signing Up

Step 1: Top


This is the top, if you follow the pictures and it should be easy.

Step 2: Bottom

Picture of Bottom
Time for the bottom!
XxsonicxX2 years ago
Can you make a psp go case
myles1263 years ago
thats the bestknex psp case on this site good job mate :) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
KnexFreak360 (author)  myles1263 years ago
Thanks!
ThAt ThInG iS aWeSoMe!!! I lIkE eVeRy OtHeR cApS!!!
ThAt Is Ok i CaN ReAd iT iTs EaSy To ReAD
DJ Radio3 years ago
Wow, this looks like a turntable more than an actual case. Try and make it hold more than 2 games.
Sorunome3 years ago
LOL, i like it! even thought i don't have a PSP! :D
hehe, that's cool, 4.5*s. But I have a DSi instead of a psp.
~KGB~3 years ago
that it quite useful, looks very good aswell 4.5*