Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here is my newest lift: the Parallel arm lift! Most credits go to Shadowman, as he invented this lift first in his unfinished ball machine, I tried to...
Just some structure...
Be sure to make spacers etc. correct
Here's also the motor
Few, finally gearing is finished!
Now you'll make both arms, later on you'll modify them as they are unique in the model.
All Y-connectors are just clipped onto the end of the rods. The string between the counterweight and the connections (without the used for the knots) ...
The red string indicates where it will go as it is hard to see.
They weren't possible to make before
It is actually the same as with the first one, just somewhat shorter. The string is 86 cm long (33.8582677 inch).
Almost finished!
Wha, you'r finally finished! Sorry for all mistakes I made, making the instruction was REALLY complicated. I also had many problems with uploading so ...
837 views
Posted:
May 11, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »