Introduction: Knex Performance Pistol
I built this knex pistol for it's performance not the looks.
Although it doesn't have a true trigger it is very powerful.
It shoots any rod you want but blue fits in the barrel nicely.(whites work well too, if you want to use green rods, be warned, you tend to loose them. I shot mine over my hedge from over 40FT)
You can also but as many elastic bands as you want but it gets quite hard to pull back with 10.
The last picture is a dint in my wall were a sharpened knex blue rod hit it :(
After you've built it please rate this instructable. I'd also like to see any Mods to it please...
Step 1: The Piece List
These are all the pieces you will need:
Grey(holds 1 rod):8
Other Grey(holds 2 rods):8
Also: As much ammo and elastic bands as you want :)
I think that is everything. Please tell me if its wrong :P
Step 2: The Handle
Just Follow The Picures Really:
Pic 1:make this
Pic 2:make this also
Pic 3:put them together
Pic 4:build this
Pic 5:Put the blue rod into the yellow connectors
Pic 6:And it should look like this
Pic 7:turn it over and add the rest
Pic 8: now you've finished the handle
Step 3: The Body
Follow The Steps:
Pic 1: make this
Pic 2: build this
Pic 3: Put them together
Pic 4: it should look like this. Thats the body finished
Step 4: The Barrel
Again, the pictures will explain everything...
Pic 1: build this
Pic 2: and put it on the other bit
Step 5: The Ram
Follow the images
Pic 1: Build this
Pic 2: "Ram" it in here
Step 6: The Rest
Look at the photos...
Pic 1: Put all these things on the pistol (if you want to)
Step 7: Putting It Together
Follow The Steps...
Oh Yeah I Am No Way Responsible For What You Decide To Do With My Performance Pistol. (It could be quite lethal ;)
After You've done please rate this instructable and I'd also love to hear about any mods to it.
We have a be nice policy.
Please be positive and constructive.