Step 1: The body

This is the hardest step, but it's pretty easy. Just follow pics and READ ALL IMAGE NOTES or your gun won't work.

Step 2: Trigger

This piece is necessary to the gun. Once again, READ ALL IMAGE NOTES!

Step 3: Panels

You're almost done. Just add on these panles and read all the image notes.

This is my version of your gun, I changed the trigger to a more reliable design and added an 8 shot mag
photo-2013-08-25 7:59 PM.jpg
joejoe9132 years ago
your trigger sucks
jmtb1234 years ago
4an half 5
FlutterTree (author)  jmtb1234 years ago
He rated it 4.5*
FlutterTree (author)  NatNoBrains4 years ago
How could he not know that >_>
no wonder your a pro :) I know I know
FlutterTree (author)  jmtb1233 years ago
I like proper grammar, that's probably why I didn't know.
jnguyen53 years ago
i made mine go 55 ft
mine went through a card board box and the rod wasnt sharpened, awesome gun.
FlutterTree (author)  jnguyen53 years ago
Thanks, mine didn't go very far but probably because my elastics were bad.
(removed by author or community request)
Thanks for rating
Dawson.J4 years ago
it looks like you can mod it so there is a clip in the handle. (if so please try)
FlutterTree (author)  Dawson.J4 years ago
I'll try that and see if it works.
TheKnexNoob4 years ago
nice, might make this later
automan974 years ago
im new wat is that on the end of the ram
FlutterTree (author)  automan974 years ago
That's a ball joint connector covered in electrical tape. If you don't have one than you can cut an orange connector in half
~KGB~4 years ago
been done b4
FlutterTree (author)  ~KGB~4 years ago
(removed by author or community request)
most pistols are exact same
FlutterTree (author)  ~KGB~4 years ago
What ones?
Almost every TDS knock off
FlutterTree (author)  TwistedParadox4 years ago
How does this look like a TDS?
The handle + clip, it's the same
FlutterTree (author)  TwistedParadox4 years ago
The handles look nothing alike, and this is a single shot.
The snowflakes not actually touching but being held inplace by the bits on the side?
FlutterTree (author)  TwistedParadox4 years ago
HUNDREDS of knex gun handles are like that.
where did it originate from though?
FlutterTree (author)  TwistedParadox4 years ago
I dunno.
finally somone agrees... thank you!
look around at nearly EVERY pistol...
jamesdude4 years ago
not bad.... 1st comment!
FlutterTree (author)  jamesdude4 years ago