Introduction: Knex Playground

Picture of Knex Playground

This is my first K'nex model ever posting on Instructables.

Keep on looking out for more of my Knex models.

Hope you enjoy building.

P.S. This is a great model for beginners.

Step 1: Gather Pieces

Picture of Gather Pieces

These are the pieces you are going to need for the playground.

Error:The picture shows 8 light gray connectors but it is supposed to be 4.

Rods:

Green-12

White-12

Blue-8

Yellow-2

Red-9

Gray-2

Connectors:

Light Gray-4

Yellow-20

Red-8

Green-2

Step 2: Ladder

Picture of Ladder

  1. You will need 2 green connectors, 4 green rods, 6 yellow connectors, 6 white rods, 2 light gray connectors, and 4 red rods.
  2. Now connect the red rods to the ladder base above.
  3. Save this part until the last step.

Step 3: Monkey Bars

Picture of Monkey Bars

  1. You will need 2 white rods,10 yellow connectors, 8 green rods, and 5 red rods.
  2. Build the part above.
  3. Save until last step.

Step 4: Poles

Picture of Poles

  1. You will need 2 red connectors, 2 yellow connectors, 4 blue rods, 1 yellow rod, and 2 white rods.
  2. Build part above
  3. DO THIS 2X

Step 5: Bottom

Picture of Bottom
  1. You will need 4 red connectors, and to gray rods.
  2. Build the part above.
  3. Almost done!

Step 6: Ending Pieces

Picture of Ending Pieces

  1. You will need 2 light gray connectors, and 2 white rods.
  2. Build part above.
  3. Go on to the next step.

Step 7: Connect Everything Together

Picture of Connect Everything Together

Connect everything together.

THANK YOU FOR BUILDING!!!!!!

Comments

sandroknexmaster (author)2015-02-18

Cool!

MsSweetSatisfaction (author)2015-02-08

All the detailed step by steps, awesome job! Welcome to instructables, I hope we get to see more from you in the future!

About This Instructable

264views

0favorites

License:

More by brosdv:Knex BuggyKnex Playground
Add instructable to: