Knex Pump-Action Shotgun PAS2000

Hello guys,
I'll show you how to make an easy knex shotgun.
with a pump-action system, so you can reload very easy
and fast !!

- it shoots about 50 ft !
- the magazine holds 20 rounds
- you can reload the magazine in 70 seconds
- you can shoot very fast !! (the whole magazine in less than 40 seconds)
- ...

Remove these ads by Signing Up

Step 1: The Barrel

the barrel is not necessary, it is just for make it look cool

1) make 1 of this
2) make this 5 times
3) make this 2 times
4) Add everything together

ridz14 says: Dec 30, 2012. 9:09 AM

it a good design
but, i missed out 2 small blue bits and when its under 16 bands on power it just blew up when i shot it ;(

Element Force says: May 5, 2012. 8:35 PM

I build it and it shoot like 2 feet

anres321 (author) in reply to Element ForceMay 6, 2012. 1:35 AM

use more rubber bands !

Element Force in reply to anres321May 30, 2012. 3:53 AM

It have max rubber band on.

instructaguy in reply to Element ForceOct 8, 2012. 9:41 AM

this happened with me, i was totally gutted, plz fix

Element Force in reply to instructaguyOct 9, 2012. 2:21 PM

yes me too

Element Force says: May 5, 2012. 7:22 AM

How many yellow connectors

Element Force in reply to Element ForceMay 5, 2012. 7:35 AM

can you make the part list because i am not sure that i will have it. i dont whant to destroy my gun

StarkIndustries says: Oct 31, 2010. 5:13 PM

I like it. It looks futuristic. I'm gonna build it after I finish my homework.

Does it ever jam/ have reliability issues?

anres321 (author) in reply to StarkIndustriesNov 1, 2010. 2:10 AM

No, this gun almost never blocks and the mag doesnt block either !
the only problem you can have is that the pushpin falls apart if you use to much rubber bands but you can shoot very fast without blocking :p

instructaguy in reply to anres321Jan 16, 2012. 10:35 AM

my ammo got jammed so i dont like the gun that much anymore

anres321 (author) in reply to instructaguyJan 16, 2012. 11:38 AM

do you use the pusher of the mag ? because if you dont use it the impact of the pushpin will cause the ammo to be launched in the mag and they will not be horizontaly anymore

instructaguy in reply to anres321Jan 18, 2012. 11:49 AM

sorry read again and yeah i do, i built it twice step by step and i didnt work and i really liked the design.

instructaguy in reply to anres321Jan 18, 2012. 11:47 AM

what do you mean by pusher sorry

anres321 (author) in reply to instructaguyJan 19, 2012. 8:28 AM

I mean the stuff you see in the third picture, step 10. It is used for pushing the bullets down.

dragon#1 in reply to anres321Dec 9, 2011. 6:42 PM

my fireing pin exploaded: )

anres321 (author) in reply to dragon#1Dec 10, 2011. 3:49 AM

yeah, thats a problem you can have with every gun :p just use less rubber bands or add duct tape to the fireing pin to hold the peaces in place

dragon#1 in reply to anres321Dec 17, 2011. 1:45 PM

or just dont dryfire

anres321 (author) in reply to dragon#1Dec 18, 2011. 2:14 PM

yeah indeed ! if you dont use any ammo your fireing pin wont be slown down and will deconnect.

dragon#1 in reply to anres321Jan 6, 2012. 10:54 AM

hahahaha i learned it the hard way

anres321 (author) in reply to dragon#1Jan 7, 2012. 3:37 AM

probably the best way !! :p

dragon#1 in reply to anres321Jan 7, 2012. 3:28 PM

good gun by the way 5* also could you turn it into a rifle?????????? pleaseÔÔ
U

anres321 (author) in reply to dragon#1Jan 8, 2012. 2:34 AM

how do you mean ? just make it look more like a normal gun ?

dragon#1 in reply to anres321Jan 8, 2012. 6:30 AM

also puting the mag sideways like in cod 3 (the old one)

dragon#1 in reply to anres321Jan 8, 2012. 6:23 AM

shoot 1 peise instead of 3=)

anres321 (author) in reply to dragon#1Jan 9, 2012. 9:09 AM

Sorry bro, I really don't have time for this anymore, vacation is just over... It has been a very long time since i have seen my knex :p maybe you can find someone else to do it for you ?

dragon#1 in reply to anres321Jan 9, 2012. 10:20 AM

or i could do it

anres321 (author) in reply to dragon#1Jan 9, 2012. 1:35 PM

If you do it be sure to post some pictures or something !!

dragon#1 in reply to anres321Jan 9, 2012. 2:59 PM

ill do it but i need your permishon

anres321 (author) in reply to dragon#1Jan 19, 2012. 8:36 AM

yeah, go ahead !! I would love it if you make it and put some kind of credits in there.

dragon#1 in reply to anres321Feb 16, 2012. 10:43 AM

since u made it u will get some credit

instructaguy says: Jan 15, 2012. 7:51 AM

i made this gun before quiet a while ago and it didnt work. i tried fixing it and i didnt do very well. because it looks so cool and in the video it is so awesome(best gun ive honestly seen). before when itried to build it i did it on my phone but i have a netbook now so hopefully it will be easier, and will work. cool gun man im gunna subscribe, and hopefully it will work.