With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here are the instructions for the pump lift featured in Catastropha! If you have any questions then feel free to ask! Be sure to read all the image no...
You'll first make the base.
Now it's time for motor and gearing. You'll may be able to modify it so that it uses a different motor, but I don't think that that works as the motor...
Next part of motor and gearing.
This is the third and last part of motor and gearing!
Now you'r making the small track piece where the balls are pushed allong.
Now you'll be making the actual pump.
This is where the balls go from horizontal movement to vertical movement.
Now your making the ball shaft.
It's time to make the top!
You just have to add six balls into the shaft and then your finished!
Remove these ads by
Signing Up595 views
2 favorites
Posted:
Feb 3, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
I'll definitely use it in my next ball machine.
Keep in mind that you could probably make it higher but idk how the motor would react :P
BTW I have two 12v motors but only one adapter that I allready used for the parallel arm lift, I'll have to buy a second :)
One of those motors and the adapter did I allready use for th parallel arm lift, so I have to buy a second adapter for the motor in the pump lift. =)