Instructables
loading
loading
Picture of Knex RSASS (UPDATE)
IMG_1523.JPG
IMG_1521.JPG
IMG_1520.JPG
IMG_1525.JPG
IMG_1515.JPG
IMG_1509.JPG
RSASS.jpg
IMG_1510.JPG
IMG_1511.JPG
IMG_1512.JPG
IMG_1513.JPG
IMG_1514.JPG
Here's my long awaited RSASS. This is also the first RSASS on instructables made out of knex. I hope you all like it. *I give credit for the handle to beanieostrich*

Pros:
Looks Cool (My Opinion)
45-50 feet
Ram Guide
Long Pull-Back On The Ram
Cool Scope (My Opinion)
Comfortable
Removable Mag
Internal Mag Pusher

Cons:
Uses Some Cut Parts

DON"T FORGET TO RATE, COMMENT, AND SUBSCRIBE!!!!!!!!!!!!!!
Knex.X2 years ago
In pic 9, there is a rod in the middle of the mag. I assume it is fake?

don't think so, i'm pretty sure it has an internal mag pusher

CODawesome2 years ago
I'm speechless
Raz1r Knex Bull3t (author)  CODawesome2 years ago
Lol, thanks. I made this a while ago.
POST INSTRUCTIONS THIS GUN LOOKS BEAST!!!
Raz1r Knex Bull3t (author)  2000smartkid2 years ago
This gun is long gone.
Can u gage how many pieces it is?
Um, not really. This gun is long gone though.
I love it! (that's what she said.)
wow looks just like the real thing!!!!
hedzup4563 years ago
Good to see no 'Too generic' comments. I see that as trolling, and thus, i don't want to post the 'rifle' i have made over the past sixmonth.

Also, epic looking guyn, looking forward to a 'ible
DeathSkull3 years ago
Using cut pieces shouldn't be a con. People need to start dealing with it.
Sharir17013 years ago
hey ! that's the mag you built inspired from my SSM. credit, please?
btw, great gun, 95% perfect replica and good stats. i like the bottom addition to the mag. good gun overall, clean and cool. 4.5*
"inspired from my SSM"

Inspired.

Not copied, no credit.
yes, but if he hadn't have seen my configuration for my mag, he probably never would have built this. it uses the same mechanism, just that the inner mag walls are closer, in order for a smaller round. anyway, although he did give me partial credit at the end, i still said (before that) that never mind.
Raz1r Knex Bull3t (author)  Sharir17013 years ago
Um, I kinda modified the internals of the mag a lot, so it just has a generic outside that anyone could build. But if you feel you need credit, whatever.
nvm you don't have to.
Raz1r Knex Bull3t (author)  Sharir17013 years ago
Meh, I gave partial credit.
ok thanks.
The Jamalam3 years ago
Looks nice and clean. If you want to improve the range, I may be wrong here but I'd try and minimise contact between the ammo and top of the barrel. It looks like it rubs against it until it leaves the gun. I like the shape and I think you've done a great job here.
Raz1r Knex Bull3t (author)  The Jamalam3 years ago
It actually doesn't rub against the barrel at all. The bullet may bump it a little going down the barrel, but that's about it.
tytiger333 years ago
Please post this gun as well as your g36c.
Raz1r Knex Bull3t (author)  tytiger333 years ago
The G36c is gone.
mahmel3 years ago
nice design. However, imo, the 'sexy curve' at the stock could be better, by making the outer layers the curve, not the middle three.
SumRndmGuy3 years ago
one word...EPIC
Raz1r Knex Bull3t (author)  SumRndmGuy3 years ago
Thanks!!!!!!!!!!!!
The Nomlack3 years ago
Looks great! Are you gonna post it?
Raz1r Knex Bull3t (author)  The Nomlack3 years ago
I don't know, it depends how many people want it.
I would like it to be posted.
SumRndmGuy3 years ago
thats impressive!!
Raz1r Knex Bull3t (author)  SumRndmGuy3 years ago
Thank You!
H1T4TCH13 years ago
Hm, a very, very little bit too bulky when I compare it with the picture of the real RSASS. But, I wouldn't have build it like that! This is way better than most of us could do it ;)
Raz1r Knex Bull3t (author)  H1T4TCH13 years ago
Thanks! : )
nice plz post
didexo3 years ago
Looks good!
ryry20113 years ago
Nice!
Raz1r Knex Bull3t (author)  ryry20113 years ago
Thanks! : )
AUG-5OM33 years ago
Looks really good.
Raz1r Knex Bull3t (author)  AUG-5OM33 years ago
Thanks! : )
Great looking gun you got there! The back part (from stock to mag) looks almost spot-on, great job!