Introduction: K'nex Ratchet Tool
Here is my latest invention, a K'nex Ratchet tool, i saw nobody had posted one so i decided to make one myself.
Step 1: Parts List
1 Tan Clip
Step 2: Build the Base
Build your "Base" With 8 Green Rods and the 8 Green Connectors.
Step 3: Add the White Rods
Attach 8 White rods to your base.
Step 4: Build the Back of the Base
Build the back of the base.
Step 5: Attach the Back of the Base
Attach your part from last step and add the Grey Connectors to hold it on.
Step 6: Build and Add the Ratchet Holder
Build the Stick and put it in the hole of the White Connetector.
Step 7: Add the Ratchet and Handle
Add the White Connector and the white rods, then add the Tan Clip, and add the 2 Orange Connectors.