Introduction: K'nex - Ray Gun Mark II Instructions

Picture of K'nex - Ray Gun Mark II Instructions

Hey guys and random zombie fans and yes you are not seeing things, yes that is the first ever Ray Gun Mark II to be made out of K'nex on Instructables and I have also made instructions for it so you can have your very own.

Before we go any further, I would like to thank and give a lot of credit to Instructables member The Red Book Of Westmarch as I have used his Dragunov handle, trigger and barrel structure as this is how I got the idea from so many thanks Red. The Ray Gun Mark II took me 7 hours and 10 minutes to build it and this does include making minor tweaks and adjustments to it.

Good Points

· Removable Magazine

· Good Iron Sights

·Very Realistic

· Comfortable Hand Grip (Thanks To Red)

Bad Points

· Doesn't Shoot Because It's Just A Model

· Uses Quite A Lot Of Cut Pieces (see Parts List)

In Call Of Duty: Zombies, the Ray Gun Mark II will only appears in all Call Of Duty: Black Ops II maps providing you have downloaded the Vengeance DLC where it is only available from the Mystery Box for 950 points. It fires a 3 burst round that with one shoot can kill up to 10 zombies if they are standing one behind the other. When it is Pack-A-Punched for 5000 points it becomes the "Porter's Mark II Ray Gun" where you get a bigger magazine and more ammo. The one shoot kill is still up to round 37 or even higher when it's is not PAP. Speed Cola makes the reload very swift and Vulture Aid is useful since ammo is fired in bursts, you get 1 or 2 bullets occasionally for itfrom zombies when they are killed. Overall this weapon is only useful if you are good at rape training.

Also check out my other creations and instructions

Step 1: Parts List

Picture of Parts List

If you have any trouble or need more pictures just leave a comment and I will get back you ASAP. I strongly advised you to collect all the pieces before you start building. Also I have added a few notes throughout this instructable to make it more easier to understand something if you run into any difficulty.

Green Rods - 211

White Rods - 81

Blue Rods - 14

Green Connectors - 19

White Connectors - 30

Blue Connectors - 22

Yellow Connectors - 63

Red Connectors - 22

Light Grey Connectors - 12

Dark Grey Connectors - 15

Orange Connectors - 11

Tan Connectors - 5

Tan Connectors (with the little tab cut off) - 5

Y Shape Black Connector - 43

Black Socket End - 4

1.9cm cut Rods - 14

4.4cm cut Rods - 5

Green Rods (cut, see step 6) - 2

Red Connector (cut. see step 2) - 1

Light Grey Connector (cut, see step 5) - 1

Orange Connector (cut, see step 2) - 3

Blue Hinge Half - 1

Black Hinge Half - 1

Blue Spacers - 15

Rubber Bands - 5

Total - 605

Step 2: Barrel Part I, Trigger & Horizontal Hand Grip

Picture of Barrel Part I, Trigger & Horizontal Hand Grip

Step 3: Barrel Part II & Magazine Well

Picture of Barrel Part II & Magazine Well

Step 4: Handle

Picture of Handle

Step 5: Barrel Part III & Outer Layers

Picture of Barrel Part III & Outer Layers

Step 6: Magazine

Picture of Magazine

Step 7: Done

Picture of Done

Well done you made it to the end, I do hope you have enjoyed building it.

Zombie Quotes About The Ray Gun Mark II

"Hey! Look at what the devil box gave me"

"Bullets or lasers? Hmm, makes no difference to me!"

"The Ray Gun Mark II?! Is that like, a sequel to the original"

Thanks for building it, please leave a comment in the box below and subscribe


Dr MonkeyMan (author)2017-08-03


CorgiCritter (author)2015-02-12

Pretty ugly, but still a good model.

Thanks Corgi, its not that ugly

I was not trying to be negative, it just doesn't seem as pretty as most of your guns. Perhaps if I played COD I would see it differently.

Your absolutely right as I do understand that you were not trying to be negative since it is not based of any real weapon but it is in fact a wonder weapon that appears in all the zombie maps for Call Of Duty: Black Ops II providing you have downloaded the Vengeance DLC.

Ok. :)

War pig (author)2014-03-07

That's really awesome!!!!!!

Zombiekiller-93 (author)War pig2014-03-19

Thanks War Pig

sandroknexmaster (author)2014-03-08

Looks good!

Thanks sand

hunter999 (author)2014-03-07

Wow, this look pretty neat :-). Good job! :D

Thanks hunter, I will be uploading two more instructions this month so stay tuned

Cool! Sounds good! :-)

It really is not too bad. There are a few angles that are off here and there, but overall you did a VERY nice job! Your lack of a couple angels can be excused because the Ray Gun Mark II has a LARGE AMOUNT of wieird ancles.

Thanks Red, it does has a very wired shape but I did the best I could as I 'm really only good at following instructions but I wanted to try something different. My favourite bit is that it reloads like the real thing which was difficult but I did it. I will posting be another two instructions for March so stay tuned.

You did good!

akshat21045 (author)2014-03-06

Really nice gun! I might go mod it and make it shooting... just after a few days. Exams are going on and one week is still left D:. After that I will be sure to make it, although I don't have any hinges.

You earned a sub!

Thanks for sub akshat, if need to buy some hinges, go to this website

Good luck with your exams

JonnyBGood (author)2014-03-05

Looks pretty cool! I'm a big fan of Sci-Fi styling on guns and you definitely nailed it!

Thanks Jonny

No prob! On a side note, spring break is next week for me. So I hope to get all my previews posted and get the Competitor VI modded.

Can't wait for the Competitor VI, are you going to build the Ray Gun Mark II

I'm considering building it. I got other things that I promised I would build so I have to do those first. I also would want to make this into a shooting model so it would take me awhile to get this fitted with a removable horizontal magazine. Especially with it being loaded from the back, but on the other hand I really like that feature so I will look into trying to build this or just trying the concept. It is a really good idea.

Thanks Jonny, you should put this in your favourites so you don't forget

Oh yeah! Thanks

Thanks, let me know roughly when you might be making this

Well expect Buzzsaw and Zip3 to be posted next week. After that I will post another gun ible and then I have freedom to chose my next project so it would be then at soonest. So maybe three weeks?

Ok, good luck

Ryleem0 (author)2014-03-05

I wish I had knex I would make a lot of cod guns!

Zombiekiller-93 (author)Ryleem02014-03-05

Ask for some K'nex for your birthday or christmas

Zombiekiller-93 (author)2014-03-05

Thanks Mullet

About This Instructable




Bio: Hello there I'm Zombiekiller-93 but me can call me Jay. I like making models of K'nex guns from the Call Of Duty games ... More »
More by Zombiekiller-93:K'nex - CZ-75 InstructionsK'nex - Biplane InstructionsK'nex - MP5K Instructions
Add instructable to: