Introduction: K'nex Rear Suspension 2

Picture of K'nex Rear Suspension 2

One of the two rear suspension design made by me. Both designs have the wheels situated on one continuous axle, and use elastic bands as the "rebound."

Both designs are relatively simple, and were originally made by me. If any other models exist, that were published before mine, have any resemblance, it is solely coincidental.


Step 1: The Suspension Arm

Picture of The Suspension Arm

Step 2: The Suspension Apparatus

Picture of The Suspension Apparatus

Step 3: Connections..

Picture of Connections..

Step 4: Adding the Elastics

Picture of Adding the Elastics


TSC (author)2010-04-01


Dante9030 (author)2009-07-07

those are the kind of wheels i have

smattman22 (author)Dante90302009-12-05

everyone has these wheels. >.>

aaronj (author)2009-07-28

interested in a solid axle rock crawler? ill post if ppl feel its worth the time

amtdude (author)2009-06-24

not interesting. put it on a car and it will be a bit beter. overall 3 *

the_burrito_master (author)2009-06-24

cool! not very realistic but it's still awesome.

About This Instructable




More by binglebeebop:K'nex FlatbedAn Oh-So-Original Duct Tape WalletK'nex Rear Suspension 2
Add instructable to: