Picture of K'nex Riddick Blade
This blade is modeled after the saber claws used by Riddick
Remove these adsRemove these ads by Signing Up

Step 1: Blade

Picture of Blade

Step 2: Handle

Picture of Handle
Add these pieces to both sides of the handle of the blade. The blue slotted connector closest to the blade can be difficult to get in. I suggest wedging it in between both silver rods on both sides and then snapping the parts together.

Step 3: Finished

Picture of Finished
Enjoy your new k'nex saber claw. (id suggest making two of these, its much funner that way) =:^b