Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here it is, the MUCH smoother version of the ring lift! Most credits go to Shadowman39 as he original invented this lift, I rebuilt it from the film o...
Ok, here we start with the base!
Now it's time to make the motor which is inside the bottom. You could also use a different motor, but my instruction is on the 12V motor.
Now you'll do the next part of the motor.
Now you'r making the last part of the motor!
Now you add the mtor to the base and connect a bit of the chain as it is later on far to complicated to do so.
Now we're making the entrance!
now it's finally time to make the ring! It consits out of 32 single cabines.
Now you just have to complete the lower part of the lift!
Now it's time to make the tower. It is just three red rods high.
It's time to make the lower top.
Now it's time to make the exit path.
It's finally time to make the far top!
Now it's time to make the chain. The rest of it (remember, you already atached a bit) has a hole lot of 116 chainlinks.
Congradulations! You just finished the ring lift! If you have any problems or some feedback, why not leave a comment? For more awesome projects please...
1,380 views
Posted:
Feb 3, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »